200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
Get the rocker cover off and see what it looks like whether it turns when cranked over
ffs not again ...grrrrrr
- Thread starter wiltshire landyman
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Get the rocker cover off and see what it looks like whether it turns when cranked over
robint
Well-Known Member
- Posts
- 7,057
have you peeped inside the filler neck to see if cam is turning when cranking the engine
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
yep first thing we did nothings moving insidehave you peeped inside the filler neck to see if cam is turning when cranking the engine
robint
Well-Known Member
- Posts
- 7,057
SmileySteve
Well-Known Member
- Posts
- 1,423
- Location
- Dumfrieshire
Sorry to hear mate, any idea what make / supplier the belt is from? could be others suffered similar probs, its rare but have known new belts break within months, maybe worth folk starting a beware list?
Hope not too much damage done
Hope not too much damage done
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
it was done by the guy who does all my work which I trust fully..the belt kit he did get from the same supplier and funnily enough its the same supplier who sold him the ****part clutch
gemsdad
NOT BOTHERED.
- Posts
- 67,829
- Location
- halfway between here and there.
it was done by the guy who does all my work which I trust fully..the belt kit he did get from the same supplier and funnily enough its the same supplier who sold him the ****part clutch
tell him to buy his parts from elsewhere then,obviously **** that he is buying.
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
its a dayco belt kit.
its been suggested there may be a prob with the injection pump bearings seizing and causing a sudden stop and then snapping the belt???
its been suggested there may be a prob with the injection pump bearings seizing and causing a sudden stop and then snapping the belt???
robint
Well-Known Member
- Posts
- 7,057
the amount of stuff you,ve renewed , surely it must be getting to look like a new disco soon
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
not far offthe amount of stuff you,ve renewed , surely it must be getting to look like a new disco soon
