Fbh

cwinossett · Oct 31, 2008

HI again every one just have a question about the none working fbh on my 2000 td4 where do you start with finding the problem? and after a quick check in the engine bay fuse box i noticed fuse 3 and a relay both down as engine managment are missing could this be anthing to do with it or are they both supposed to be missing. thanks

goonarmy · Oct 31, 2008

well i know nuthin about the fbh but those missing fuses would be where id start

Davec · Oct 31, 2008

has your FBH ever worked?

cwinossett · Oct 31, 2008

i would like to know what the empty fuse slot is for before i plug one in and no davec its never worked while ive had it but this is the first cold spell i bought it in june thanks

goonarmy · Oct 31, 2008

stick a fuse in and if it works that was the problem.

Greenie · Oct 31, 2008

Fuel burnin heeter!!!!

I aint got wun of them?? un mines a 2001?

Why!!

Davec · Oct 31, 2008

Are you sure you've got one, it was only on the higher speck models.

Greenie · Oct 31, 2008

Davec said:
Are you sure you've got one, it was only on the higher speck models.

TD4 ES 2001...

Geepers · Oct 31, 2008

the heater was an extra on older models . The first thing you hear when the heater is going to kick in is ticking noise from the back left side under the wheel arch. this is the pump for the deisel. mine pumped on a couple of occasions before the heater started working. Do a Google for wabasto they make the heaters.

Dann · Oct 31, 2008

cwinossett said:
HI again every one just have a question about the none working fbh on my 2000 td4 where do you start with finding the problem? and after a quick check in the engine bay fuse box i noticed fuse 3 and a relay both down as engine managment are missing could this be anthing to do with it or are they both supposed to be missing. thanks

Search FBH and you'll find all the info also download 'RAVE' at greenoval.D..

chromiumuk · Nov 1, 2008

Greenie said:
Fuel burnin heeter!!!!

I aint got wun of them?? un mines a 2001?

Why!!

Same here Greenie, 2003 Serengeti Auto & no FBH. Can't say I'm too bothered at that.

cwinossett · Nov 1, 2008

The fbh is there and would rather have it working as it should because belive it or not every thing else on the car works properly and it dont leak.Ill put the missing fuse back in and after that the fuel pump sounds a good place to start cheers

chromiumuk · Nov 1, 2008

Hey, maybe mine does have one fitted & it just doesn't work. Oh well, tell ye what, ah'll let you do the worryin for me.

rubythursday · Nov 1, 2008

My FBH works and there is no fuse in position 3, the FBH fuse is a 20 amp in position 5.

cwinossett · Nov 2, 2008

Thanks for the useful info no 3 fuse not supposed to be there then

rubythursday · Nov 2, 2008

That's correct no fuse in position 3.
Pull the fuse from position 5 for a few seconds, that resets the FBH in case it's had a flame out, after 3 lighting attempts it locks out and pulling the fuse resets it.

cwinossett · Nov 24, 2008

thanks for all the info turned out to be the temp sensor just wired it to a switch as posted by willo all works fine now and cheaper than a new sensor

Fbh

cwinossett

New Member

goonarmy

Beer tester

Davec

New Member

cwinossett

New Member

goonarmy

Beer tester

Greenie

New Member

Davec

New Member

Greenie

New Member

Geepers

New Member

Dann

Active Member

chromiumuk

Well-Known Member

cwinossett

New Member

chromiumuk

Well-Known Member

rubythursday

Member

cwinossett

New Member

rubythursday

Member

cwinossett

New Member

Similar threads