Datatek
Well-Known Member
- Posts
- 45,958
- Location
- Near Poitiers SW France
Plenum is the chamber under the plastic
P38A Retrofit heated front screen
- Thread starter LR-hobbs
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 45,958
- Location
- Near Poitiers SW France
Only there briefly visiting relatives on several occasions, Toronto and Thunder Bay.
Nice one il definitely add this modification onto my list .
Flossie
Well-Known Member
- Posts
- 11,293
- Location
- Shropshire
One arm is slightly longer than the other, they look identical but are not.
If you look at the caps covering the wiper arm nuts, there is a little slot you use to ping them out with a thin flat blade screwdriver.
Good to know , being brand new to the P38 there is a lot to learn.
- Posts
- 4,393
- Location
- Near Heathrow.
- Posts
- 36,809
- Location
- North Shropshire
I had one of them in my 2A when i was going to college in the winter! Never had any flames though!! That might have been worth while
- Posts
- 4,890
- Location
- Rotherham
I bought one to use when my heater matrix leaked and I by passed it
My heater matrix on my P38 is currently leaking from the o rings after we changed the radiators.
Is it an easy fix ?
- Posts
- 1,742
- Location
- Buckinghamshire.
Yes and no. Easy fix with the right loooong screwdriver tool and driling a few holes (that the previous owner has already drilled), but fiddly too. They leak a lot. Some people change the matrix for an Audi one and do away with the O ring setup all together….. but that is a dash out job.
Search here, or Google it. It’s been “How To’d” a thousand times!
Search here, or Google it. It’s been “How To’d” a thousand times!
Last edited:
- Posts
- 4,890
- Location
- Rotherham
I changed to the Audi matrix without taking dash out. Visit PaulP38.com very good write up with photos on how to do it
- Posts
- 1,742
- Location
- Buckinghamshire.
I was just reading that...
Is it a neat job? I don't like cutting stuff up if I can avoid it....!
- Posts
- 4,890
- Location
- Rotherham
In my opinion yes it is .
Similar threads
Disco 3 (LR3)
Discovery 3 front heated seats