F.S. 85 GM DANA 60, 1ton 4x4 AXLES, 4.56 gears, Detroit Locker. in NH,ME

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
M

MilitaryTruckParts

Guest
Hi
We recently bought some nice US MILITARY SURPLUS
1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV)
These are the militarized versions of the standard civilian pickups
and blazers (camo paint, reenforced frames, gun mounts, radio mounts,
24 volt, special towing and lifting equipment).

We are parting some of them out in Southern Maine, and Southern NH.

We have all types of parts available EXCEPT ENGINES
FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL
THESE)
Most of these vehicles are RUST FREE or have very little rust.
We have been selling many parts to restore civilian trucks, or
restore the military version.

PARTS FIT:
1981-87 PICKUPS
1981-90 BLAZERS, SUBURBANS
Some parts can be adapted to other vehicles like AXLES.

SOME PARTS FOR SALE ARE:

1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups.
These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod,
Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT
REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles.
$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS
might be available seperatly.

1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup).
GM 10 bolt (is the front DANA 44?, somwe people have said yes??)
3.08 gears, disk breaks in front, drum in rear. locking hubs.
bent tie rod , only $200.00 set
straight tie rod $250.00 set

GOOD RUST FREE, DENT FREE BODY PARTS (dented for less)
PERFECT FRONT FENDERS $75.00
COMPLETE DOORS WITH GLASS $150.00
RADIATOR SUPPORTS 25.00
PICKUP CABS $300.00 - $500.00
PICKUP TAILGATES $150.00
FRONT GRILL GUARDS (MILITARY) $75.00
FRONT BUMPERS 75.00
REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK)
REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00
STRIPPED BLAZER TAILGATES $100-150.00
RUST FREE PICKUP BEDS WITH DENTS, ASK!
RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS
BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF)
" " " (WITH GLASS $100.00)

Some other parts such as all the military accesories, seats,
instruments, drive train, etc, ASK, ASK, ASK

208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00

We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES,
With assorted other parts, WITH paperwork to register. About
$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS)

Anyway these are a few of the parts we're selling off these vehicles.
remember, rust free parts with dents are less. (rusted stuff going to
scrap pile).

So, just tell us what part you need. and we'll reply.
SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS

Reply to
[email protected]
REMOVE,REMOVE from the return address to reply.

Thanks for your time.
Ron


 
OOPS
left out that these are CHEVY'S
parts fit, Chevy, GMC trucks


>Hi
>We recently bought some nice US MILITARY SURPLUS
>1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV)
>These are the militarized versions of the standard civilian pickups
>and blazers (camo paint, reenforced frames, gun mounts, radio mounts,
>24 volt, special towing and lifting equipment).
>
>We are parting some of them out in Southern Maine, and Southern NH.
>
>We have all types of parts available EXCEPT ENGINES
>FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL
>THESE)
>Most of these vehicles are RUST FREE or have very little rust.
>We have been selling many parts to restore civilian trucks, or
>restore the military version.
>
>PARTS FIT:
>1981-87 PICKUPS
>1981-90 BLAZERS, SUBURBANS
>Some parts can be adapted to other vehicles like AXLES.
>
>SOME PARTS FOR SALE ARE:
>
>1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups.
>These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod,
>Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT
>REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles.
>$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS
>might be available seperatly.
>
>1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup).
>GM 10 bolt (is the front DANA 44?, somwe people have said yes??)
>3.08 gears, disk breaks in front, drum in rear. locking hubs.
>bent tie rod , only $200.00 set
>straight tie rod $250.00 set
>
>GOOD RUST FREE, DENT FREE BODY PARTS (dented for less)
>PERFECT FRONT FENDERS $75.00
>COMPLETE DOORS WITH GLASS $150.00
>RADIATOR SUPPORTS 25.00
>PICKUP CABS $300.00 - $500.00
>PICKUP TAILGATES $150.00
>FRONT GRILL GUARDS (MILITARY) $75.00
>FRONT BUMPERS 75.00
>REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK)
>REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00
>STRIPPED BLAZER TAILGATES $100-150.00
>RUST FREE PICKUP BEDS WITH DENTS, ASK!
>RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS
>BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF)
> " " " (WITH GLASS $100.00)
>
>Some other parts such as all the military accesories, seats,
>instruments, drive train, etc, ASK, ASK, ASK
>
>208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00
>
>We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES,
>With assorted other parts, WITH paperwork to register. About
>$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS)
>
>Anyway these are a few of the parts we're selling off these vehicles.
>remember, rust free parts with dents are less. (rusted stuff going to
>scrap pile).
>
>So, just tell us what part you need. and we'll reply.
>SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS
>
>Reply to
>[email protected]
>REMOVE,REMOVE from the return address to reply.
>
>Thanks for your time.
>Ron
>


 
Are the 1 ton frames full sized 8 foot box frames?

Or, are they the shortened military frames, that used the cut off box?

Please reply in group, as I can't get an e-mail through your address, even
with removing the REMOVE.

Thank you,

Refinish King

PS

Are the front Dana 60's set up for Budd wheels with Dual Rear Wheels, or
single rear wheels?

The price sounds kind of high, but maybe if they're not full of Arabic sand
and no bomb parts. I might be interested.


"MilitaryTruckParts" <[email protected]> wrote in message
news:[email protected]...
> OOPS
> left out that these are CHEVY'S
> parts fit, Chevy, GMC trucks
>
>
> >Hi
> >We recently bought some nice US MILITARY SURPLUS
> >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV)
> >These are the militarized versions of the standard civilian pickups
> >and blazers (camo paint, reenforced frames, gun mounts, radio mounts,
> >24 volt, special towing and lifting equipment).
> >
> >We are parting some of them out in Southern Maine, and Southern NH.
> >
> >We have all types of parts available EXCEPT ENGINES
> >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL
> >THESE)
> >Most of these vehicles are RUST FREE or have very little rust.
> >We have been selling many parts to restore civilian trucks, or
> >restore the military version.
> >
> >PARTS FIT:
> >1981-87 PICKUPS
> >1981-90 BLAZERS, SUBURBANS
> >Some parts can be adapted to other vehicles like AXLES.
> >
> >SOME PARTS FOR SALE ARE:
> >
> >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups.
> >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod,
> >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT
> >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles.
> >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS
> >might be available seperatly.
> >
> >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup).
> >GM 10 bolt (is the front DANA 44?, somwe people have said yes??)
> >3.08 gears, disk breaks in front, drum in rear. locking hubs.
> >bent tie rod , only $200.00 set
> >straight tie rod $250.00 set
> >
> >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less)
> >PERFECT FRONT FENDERS $75.00
> >COMPLETE DOORS WITH GLASS $150.00
> >RADIATOR SUPPORTS 25.00
> >PICKUP CABS $300.00 - $500.00
> >PICKUP TAILGATES $150.00
> >FRONT GRILL GUARDS (MILITARY) $75.00
> >FRONT BUMPERS 75.00
> >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK)
> >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00
> >STRIPPED BLAZER TAILGATES $100-150.00
> >RUST FREE PICKUP BEDS WITH DENTS, ASK!
> >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS
> >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF)
> > " " " (WITH GLASS $100.00)
> >
> >Some other parts such as all the military accesories, seats,
> >instruments, drive train, etc, ASK, ASK, ASK
> >
> >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00
> >
> >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES,
> >With assorted other parts, WITH paperwork to register. About
> >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS)
> >
> >Anyway these are a few of the parts we're selling off these vehicles.
> >remember, rust free parts with dents are less. (rusted stuff going to
> >scrap pile).
> >
> >So, just tell us what part you need. and we'll reply.
> >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS
> >
> >Reply to
> >[email protected]
> >REMOVE,REMOVE from the return address to reply.
> >
> >Thanks for your time.
> >Ron
> >

>




 

"MilitaryTruckParts" <[email protected]> wrote in message
news:[email protected]...
> OOPS
> left out that these are CHEVY'S
> parts fit, Chevy, GMC trucks
>
>
> >Hi
> >We recently bought some nice US MILITARY SURPLUS
> >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV)
> >These are the militarized versions of the standard civilian pickups
> >and blazers (camo paint, reenforced frames, gun mounts, radio mounts,
> >24 volt, special towing and lifting equipment).
> >
> >We are parting some of them out in Southern Maine, and Southern NH.
> >
> >We have all types of parts available EXCEPT ENGINES
> >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL
> >THESE)
> >Most of these vehicles are RUST FREE or have very little rust.
> >We have been selling many parts to restore civilian trucks, or
> >restore the military version.
> >
> >PARTS FIT:
> >1981-87 PICKUPS
> >1981-90 BLAZERS, SUBURBANS
> >Some parts can be adapted to other vehicles like AXLES.
> >
> >SOME PARTS FOR SALE ARE:
> >
> >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups.
> >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod,
> >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT
> >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles.
> >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS
> >might be available seperatly.
> >
> >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup).
> >GM 10 bolt (is the front DANA 44?, somwe people have said yes??)
> >3.08 gears, disk breaks in front, drum in rear. locking hubs.
> >bent tie rod , only $200.00 set
> >straight tie rod $250.00 set
> >
> >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less)
> >PERFECT FRONT FENDERS $75.00
> >COMPLETE DOORS WITH GLASS $150.00
> >RADIATOR SUPPORTS 25.00
> >PICKUP CABS $300.00 - $500.00
> >PICKUP TAILGATES $150.00
> >FRONT GRILL GUARDS (MILITARY) $75.00
> >FRONT BUMPERS 75.00
> >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK)
> >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00
> >STRIPPED BLAZER TAILGATES $100-150.00
> >RUST FREE PICKUP BEDS WITH DENTS, ASK!
> >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS
> >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF)
> > " " " (WITH GLASS $100.00)
> >
> >Some other parts such as all the military accesories, seats,
> >instruments, drive train, etc, ASK, ASK, ASK
> >
> >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00
> >
> >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES,
> >With assorted other parts, WITH paperwork to register. About
> >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS)
> >
> >Anyway these are a few of the parts we're selling off these vehicles.
> >remember, rust free parts with dents are less. (rusted stuff going to
> >scrap pile).
> >
> >So, just tell us what part you need. and we'll reply.
> >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS
> >
> >Reply to
> >[email protected]
> >REMOVE,REMOVE from the return address to reply.
> >
> >Thanks for your time.
> >Ron
> >

>




 

>Are the 1 ton frames full sized 8 foot box frames?

All military chevys use the FULL 8 foot frame. (extra reenforced)
their is NO short military chevy M series pickups (airforce or navy
might have just regular short pickups)
>
>Or, are they the shortened military frames, that used the cut off box?
>


>
>Are the front Dana 60's set up for Budd wheels with Dual Rear Wheels, or
>single rear wheels?

all single rear wheels
single hub front.
(military did have some duellys though)
>
>The price sounds kind of high, but maybe if they're not full of Arabic sand
>and no bomb parts. I might be interested.

actually pricecheap 4x4 dealers want 2000 for just front.
like boyce equip
>
>
>"MilitaryTruckParts" <[email protected]> wrote in message
>news:[email protected]...
>> OOPS
>> left out that these are CHEVY'S
>> parts fit, Chevy, GMC trucks
>>
>>
>> >Hi
>> >We recently bought some nice US MILITARY SURPLUS
>> >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV)
>> >These are the militarized versions of the standard civilian pickups
>> >and blazers (camo paint, reenforced frames, gun mounts, radio mounts,
>> >24 volt, special towing and lifting equipment).
>> >
>> >We are parting some of them out in Southern Maine, and Southern NH.
>> >
>> >We have all types of parts available EXCEPT ENGINES
>> >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL
>> >THESE)
>> >Most of these vehicles are RUST FREE or have very little rust.
>> >We have been selling many parts to restore civilian trucks, or
>> >restore the military version.
>> >
>> >PARTS FIT:
>> >1981-87 PICKUPS
>> >1981-90 BLAZERS, SUBURBANS
>> >Some parts can be adapted to other vehicles like AXLES.
>> >
>> >SOME PARTS FOR SALE ARE:
>> >
>> >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups.
>> >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod,
>> >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT
>> >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles.
>> >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS
>> >might be available seperatly.
>> >
>> >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup).
>> >GM 10 bolt (is the front DANA 44?, somwe people have said yes??)
>> >3.08 gears, disk breaks in front, drum in rear. locking hubs.
>> >bent tie rod , only $200.00 set
>> >straight tie rod $250.00 set
>> >
>> >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less)
>> >PERFECT FRONT FENDERS $75.00
>> >COMPLETE DOORS WITH GLASS $150.00
>> >RADIATOR SUPPORTS 25.00
>> >PICKUP CABS $300.00 - $500.00
>> >PICKUP TAILGATES $150.00
>> >FRONT GRILL GUARDS (MILITARY) $75.00
>> >FRONT BUMPERS 75.00
>> >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK)
>> >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00
>> >STRIPPED BLAZER TAILGATES $100-150.00
>> >RUST FREE PICKUP BEDS WITH DENTS, ASK!
>> >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS
>> >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF)
>> > " " " (WITH GLASS $100.00)
>> >
>> >Some other parts such as all the military accesories, seats,
>> >instruments, drive train, etc, ASK, ASK, ASK
>> >
>> >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00
>> >
>> >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES,
>> >With assorted other parts, WITH paperwork to register. About
>> >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS)
>> >
>> >Anyway these are a few of the parts we're selling off these vehicles.
>> >remember, rust free parts with dents are less. (rusted stuff going to
>> >scrap pile).
>> >
>> >So, just tell us what part you need. and we'll reply.
>> >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS
>> >
>> >Reply to
>> >[email protected]
>> >REMOVE,REMOVE from the return address to reply.
>> >
>> >Thanks for your time.
>> >Ron
>> >

>>

>
>


 
Back
Top