Essex lanes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
best way to check if you need an adj Panhard rod is measure axle posistion, is it in the middle of the chassis ? If it has been lifted then it may require one, just make sure you have used loads of threadlock on it have seen one come undone and then worn the threads and it came apart.
Mine is a defender with OME +2inch springs standard Panhard rod was OK and have fitted gen bushes, also have QT corrected arms, but only have +2 shocks. Do you have + 5 front shocks or lowerd turrets maybe extra travel seeing the bushes off ?
 
James1966 said:
best way to check if you need an adj Panhard rod is measure axle posistion, is it in the middle of the chassis ? If it has been lifted then it may require one, just make sure you have used loads of threadlock on it have seen one come undone and then worn the threads and it came apart.
Mine is a defender with OME +2inch springs standard Panhard rod was OK and have fitted gen bushes, also have QT corrected arms, but only have +2 shocks. Do you have + 5 front shocks or lowerd turrets maybe extra travel seeing the bushes off ?
Click to expand...

2" shocks & yes I have modified turrets on the front - so it could be them causing it

Well I been out all day in it & had no issues as of yet - I will slide under there tomorrow and check everything - I didn't use threadlock but if it comes undone I will be claiming on my 12month guarantee lol :)))

Cheers for ya advice :))
 
Sorry for the lack of a reply, been recovering from tinnitus after driving to and from the alps :D

Yes it was me in the blue 90 who was in front of you. It would be good to tag along laning sometime, but i'm heading to plymouth tomorrow until early may, so i guess i'll have to wait until then.
 
Tuskenraider said:
Nah its dead, stinks and knocks as you turn it :D
Click to expand...

Have you tried this lot?
Universal Rotating Electrics Ltd
Address: Unit 18-20, Pembroke Business Centre, Gardiners Lane South Postcode: SS14 3HY City/Town: Basildon (Essex)

Contact us: 01268 662210

I've used them before and they seem reasonable

I've never been laning before but would like to come along in the future if you people don't mind, I have been to pay and play at Bures and Chelmsford.
Kev
 
Last edited:
Exactly where i went mate :D

Old one was proper dead, rear bearing had collapsed and taken out the rotor so it was a paperweight. Got a refurbed one for £100 :) So now i am back up and running and with all this rain just in time lol.
 
You must log in or register to reply here.

Similar threads

Freddie17
Kent laning 5th?
Replies
7
Views
967
Freddie17
Freddie17
dazer200
L322 ABS, HDC, Suspension, Gone ! FIXED
2
Replies
33
Views
6K
Saint.V8
Saint.V8
BulletBrindle
How I fixed my TD5 ECU (maybe worth doing for preventative reasons too)
2
Replies
33
Views
8K
BulletBrindle
BulletBrindle
Grim
Discovery 2 Looking to swap......
Replies
0
Views
986
Grim
Grim
P
Disco 3 (LR3) Bought A Disco 3 yesterday...haaaalp!
2
Replies
20
Views
2K
hoopfish
hoopfish
Back
Top