Essex lanes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
So after many hours reading I'm still in denial about my possible head gasket issue (not hot air in cab) - bled the system many times, new thermostat, new p gasket, flushed the system no blockages. When I've removed the thermostat bleed valve I have seen air bubbles bubbling - I've done a sniff test and it come back negative. . I've just read a possible crack in my header tank could cause a problem. . So tomorrow I'm gonna be putting my lips around the header tank and blowing as hard as I can. . Any other suggestions before I start taking head off???
 
djguy said:
So after many hours reading I'm still in denial about my possible head gasket issue (not hot air in cab) - bled the system many times, new thermostat, new p gasket, flushed the system no blockages. When I've removed the thermostat bleed valve I have seen air bubbles bubbling - I've done a sniff test and it come back negative. . I've just read a possible crack in my header tank could cause a problem. . So tomorrow I'm gonna be putting my lips around the header tank and blowing as hard as I can. . Any other suggestions before I start taking head off???
Click to expand...

Yeah. Take the head off!
 
Discodad said:
What is it doing wrong Chris?
I had problems with my kickdown cable after the mud dried hard. Result wouldn't change gear until I hit valve popping revs.
Click to expand...

Off the mark pull away is very sluggish the have to give it a boot full in first before it'll change gear and all changes are far more aggressive than they used to be.
 
djguy said:
So after many hours reading I'm still in denial about my possible head gasket issue (not hot air in cab) - bled the system many times, new thermostat, new p gasket, flushed the system no blockages. When I've removed the thermostat bleed valve I have seen air bubbles bubbling - I've done a sniff test and it come back negative. . I've just read a possible crack in my header tank could cause a problem. . So tomorrow I'm gonna be putting my lips around the header tank and blowing as hard as I can. . Any other suggestions before I start taking head off???
Click to expand...

Expansion bottle cap not sealing?
 
Hi guys, well it seems everyone is still fixing their trucks at the moment, reading through all the posts it did seem that maybe everyone would have a working one at one point but alas no, that's not how landrovers work!

I'm slowly getting a bit better after a major op and am hoping to do an evenings laning at some point, I have sold my truck but to a mate who is desperate to get it out, will be at least a month but hopefully soon, haven't been out for months now and I'm missing the mud!
 
My truck will hopefully be roadworthy within a few weeks. Would be good to catch up with everyone.

Good to hear from you John, if your up to it you are always welcome to do a few lanes in my old bone shaker.
 
The guy I sold mine to only lives over the road, he's a good mate and I gave him a hell of a deal as its not about the cash so he said I can have it anytime, I am a bit gutted I never got to use it properly. The problem at the moment is the jerking motion as I had my stomach cut open and it's very delicate...
 
Hi Jon good to see you back again, when you feel up to it let us know and we can sort out a trip, if driving yourself is uncomfortable your welcome to navigate in the passenger seat.
Keep positive.
 
You must log in or register to reply here.

Similar threads

Freddie17
Kent laning 5th?
Replies
7
Views
960
Freddie17
Freddie17
dazer200
L322 ABS, HDC, Suspension, Gone ! FIXED
2
Replies
33
Views
5K
Saint.V8
Saint.V8
BulletBrindle
How I fixed my TD5 ECU (maybe worth doing for preventative reasons too)
2
Replies
33
Views
8K
BulletBrindle
BulletBrindle
Grim
Discovery 2 Looking to swap......
Replies
0
Views
983
Grim
Grim
P
Disco 3 (LR3) Bought A Disco 3 yesterday...haaaalp!
2
Replies
20
Views
2K
hoopfish
hoopfish
Back
Top