Hi
Sorry to resurrect this thread but I also am in the same boat as a few others on here!
I went and bought a set of late 300TDI wide track Beige leather seats (electric naturally
) for my 200TDI (narrow track seat frames).
Dickie seats and rear split were no problem as they are basically the same.
The rails on the front being wider on the 300TDI seats, means I have 2 options!
1) to graft them onto the seat frames and do some sort of cunning adaptation, as it looks to me as though the frame they attach to must be quite a bit different on a 300
2) Find somebody who is breaking a late model 300TDI and buy the seat frames from him.
Anybody care to offer some advice about the best way forward.
Unlike one of the chaps on here I have the switches for the seats. The problem I have is I don't have the electrical plugs off the loom for the switches!!!
In answer to who ever it was on here who was asking about moving the seats... I believe it should be possible to temporarily attach a feed to move the seats. I believe there are 8 ways the seat can move and IIRC there are eight wires on the seat plug so its just a matter of playing with the feed until you get it right.
Cheers
John