millar190
Member
- Posts
- 86
- Location
- ballymena,northern ireland
Hi everyone anybody any ideas as to why car wont except eka code its a 1995 4.0 v8 with lpg is there a certain way to enter the code
eka code
- Thread starter millar190
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
millar190
Member
- Posts
- 86
- Location
- ballymena,northern ireland
no not a sound just flash of sidelight warning light on dash
millar190
Member
- Posts
- 86
- Location
- ballymena,northern ireland
have no idea i have a piece of paper with eka code on it but i think it is years old also have checked with land rover and they still have the same no recorded but that dosent mean some **** has not had it changed
It should be the right one! Are you looking at the manual? You should, lock the vehicle, then unlock so many times, then lock so many times, unlock so many times, then lock so many times and finally unlock and that should work! Dont be to fast doing it take your time.
millar190
Member
- Posts
- 86
- Location
- ballymena,northern ireland
have looked the manual it is turn 4 times tolock and then enter code but for what ever reason it will not except the code starting to think it is the wrong code when i enter it it does not change a thing everything else seems to work except the central locking and turn to start it comes up with press remote or enter keycode niether of which make any difference
millar190
Member
- Posts
- 86
- Location
- ballymena,northern ireland
i have been ****ing about with it now for best part of a week new lock actuator drivers side have checked all the wiring etc cant find anything wrong thinking of striking a match and seeing how high she can fly
roddy4
New Member
- Posts
- 664
- Location
- banbury,oxfordshire
i had to enter my code on a 95 diesel by pressing the unlock button on the remote,then 4 turns left enter code followed by turn to right,worked for mine,make sure there are no dash messages before you start
millar190
Member
- Posts
- 86
- Location
- ballymena,northern ireland
ill give it a try tomorrow i still think somebody has changed the becm
roddy4
New Member
- Posts
- 664
- Location
- banbury,oxfordshire
oops that could be a challenge.
millar190
Member
- Posts
- 86
- Location
- ballymena,northern ireland
i think ill end up sending becm to turner industries to get it reset andget the code
gfromleeds
Well-Known Member
- Posts
- 2,234
- Location
- leeds. westyorkshire, uk
on a 95 you dont do the 4 turns to enter programing mode just start by inputing the first number
or at least thats how it is with my 95
millar190
Member
- Posts
- 86
- Location
- ballymena,northern ireland
have tried them all **** all works was just wondering was there anything else wrong that was stopping her from accepting the code
gfromleeds
Well-Known Member
- Posts
- 2,234
- Location
- leeds. westyorkshire, uk
Any messages on display when entering code?
roddy4
New Member
- Posts
- 664
- Location
- banbury,oxfordshire
mine is a diesel 95 and i had to do the four turns to left.
Similar threads
