eka-code (engine disabled)
- Thread starter wingren
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,056
- Location
- Near Poitiers SW France
You can only get your EKA code from a dealer
Datatek
Well-Known Member
- Posts
- 44,056
- Location
- Near Poitiers SW France
Normal, you just re-synced the FOB.Had that feeling to, but, worth a try
went out again got into the bas...d and pressed the lock button inserted the key and tried to start , pressed the unlock button and she suddenly woke up.
strange , or just Land roverish???
Be wise to get your EKA code though as one day you will need it
- Posts
- 58,170
- Location
- Preston Lancs.
mozz smith
Well-Known Member
- Posts
- 1,690
- Location
- tameside manchester
:welcome2: just use the skeleton code 1515... cheers mozz
- Posts
- 58,170
- Location
- Preston Lancs.
It's applicable to NAS versions that don't have an individual lock code. Whether it works on yours is another matter.
mozz smith
Well-Known Member
- Posts
- 1,690
- Location
- tameside manchester
:welcome2:well having re-synced approx. 260 p38s over the phone, the code HAS worked on a fair percentage of those who didn't have their E.K.A, code as im sure many of my "clients and friends " on landyzone will verify .. I know all the research and landrover official paperwork says what wammy says i.e. NAS ONLY but there you go "don't always believe what l/r say " I don't know why ive been successful but hey ho if it works all the better !!!!!!! regards MOZZ
but there you go "don't always believe what l/r say " I don't know why ive been successful but hey ho if it works all the better !!!!!!! regards MOZZ
- Posts
- 58,170
- Location
- Preston Lancs.
:welcome2:well having re-synced approx. 260 p38s over the phone, the code HAS worked on a fair percentage of those who didn't have their E.K.A, code as im sure many of my "clients and friends " on landyzone will verify .. I know all the research and landrover official paperwork says what wammy says i.e. NAS ONLY
Fair enough Mozz if it works it works. How is ya?
StuckAgainSteve
Well-Known Member
- Posts
- 2,276
- Location
- London
You can only get your EKA code from a dealer
The Lynx shows you the current EKA code. I gave AP90 his ECU and EKA codes when looking at his car.
- Posts
- 58,170
- Location
- Preston Lancs.
You can't.
- Posts
- 58,170
- Location
- Preston Lancs.
Only on an unlocked BECM not on a locked one.
StuckAgainSteve
Well-Known Member
- Posts
- 2,276
- Location
- London
Sorry, I scan read too much - didn't see the bit about the BECM being locked.
:welcome2:well having re-synced approx. 260 p38s over the phone, the code HAS worked on a fair percentage of those who didn't have their E.K.A, code as im sure many of my "clients and friends " on landyzone will verify .. I know all the research and landrover official paperwork says what wammy says i.e. NAS ONLY
First time I disconnected battery on the previous 95 4.6 HSE it wouldn't accept EKA but 1515 worked first time, was surprised as I found it on another site and thought it was for NAS only, one never knows with these gRRs
mozz smith
Well-Known Member
- Posts
- 1,690
- Location
- tameside manchester
First time I disconnected battery on the previous 95 4.6 HSE it wouldn't accept EKA but 1515 worked first time, was surprised as I found it on another site and thought it was for NAS only, one never knows with these gRRs
THERE YOU GO !!!!!!!! thanks druim .regards mozz
So.....should the EKA need to be used to start after disconnecting the battery? I ask out of interest as earlier this year my battery positive terminal managed to disconnect it'self (i didn't realise until i parked up, tried to lock it & nothing). Connected the positive terminal back & fired up straight away, just had to re-set radio & windows????
Similar threads
