EGR Blank

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Elmur Thud

Member
Posts
49
Location
Goole
Hi I am working on my Disco 2 which I intend to keep, but before I go onto the next job I have one concern. I bought the Disco TD5 with an EGR blanking kit fitted, I was wondering if it would still pass the MOT this year as it did last and obviously previous years?

Cheers.
 
New MOT rules have came into play. apparently they shouldn't pass...

Ive just had my MOT and they didn't pick up on it.
Mine isn't shiny and new so it probably didn't draw there eyes to it.

If you have an engine cover on then you can't see the egr valve anyway and they can't take covers off to check so you should be fine. :)
 
If the MoT tester is hunting around to see if your EGR is blanked then you must have really upset him.

Remaps can delete egr without lifting a spanner, and in some cases like my L200 the EGR can be blanked with an electrical plug-in to the MAF which tells ten EGR to keep shut.
 
...I bought the Disco TD5 with an EGR blanking kit fitted,
Then better check the MAP sensor to make sure that those who de-EGR'd it didnt miss to clean it, for the MAP to work well that hole pointed with red arrow must be completely clean cos there's the pressure sensing crystal

MAP sensor pressure eement.jpg
 
Back
Top