Disco 2 Brake hose banjo bolt sealing washer

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

[email protected]

Active Member
Posts
125
Hi all
It never rains , it pours.......
Running my td5 hard to try and find coolent loss, I find o/s f brake sticking, lots of smoke and pong.
I looked today and one of the caliper piston boots looked fecked, wouldnt push back easy, other side did. I have decided to replace the front calipers and pads.
I am aware that I can buy a seals kit, but a new caliper sounds good.

Does any one know what size are the brake hose banjo bolt sealing washers are? and are they copper:(
 
They are held onto the hose somehow and I found werent easily removable. The indy I spoke to said they came with the hoses, but I can imagine you must be able to get them somewhere. I was replacing the hoses so it wasnt a problem for me!
 
Thanks David,
In the rave cd it says discard the sealing washers and fit new ones to the banjo bolt, so I am hoping some one will know what I need
regards.
Thats unless you can reuse the old ones
Ray
 
Yeah, I read that in the RAVE cd also. The main dealer told me that they were only available with the hoses, but as I say, I was replacing em anyway. I suspect they ARE available separately, but the hoses I had they were integral with the banjo bolt assy.

David
 
Found em, I`ve orderd 4 from lr direct, with post it was over £7.00 for 4 washes.
I`m convinced that they will be something I could get on the high street, but with home spannering, you need all the bits or your stuck... you know how it is.
Thats why I asked, thanks for you help
 
Back
Top