Hi Guys,
This morning the auto box in my Discovery 2 stopped selecting gears. When I move it from "P" all the way through and back to "P" there is nothing. However, when I put it back into "P" (after going through all the other gears) there is a noise. Not a grinding noise as in gears but rather a "screeching" noise.
On the diagnostics I get the following:
1-Gear Selection not plausible (transmission switch)
2-Front Left outlet valve short to battery
3-Shuttle valve switch electrical failure
4-Engine speed input signal intermittent or missing
I checked the oil level and it is fine.
Any help would be appreciated.
Thank Danny
This morning the auto box in my Discovery 2 stopped selecting gears. When I move it from "P" all the way through and back to "P" there is nothing. However, when I put it back into "P" (after going through all the other gears) there is a noise. Not a grinding noise as in gears but rather a "screeching" noise.
On the diagnostics I get the following:
1-Gear Selection not plausible (transmission switch)
2-Front Left outlet valve short to battery
3-Shuttle valve switch electrical failure
4-Engine speed input signal intermittent or missing
I checked the oil level and it is fine.
Any help would be appreciated.
Thank Danny
Last edited: