Defender Bulkhead Vents - Blanking Plates

tyclyd · Dec 7, 2009

I have replaced the foam seal strips on my 2004 TD5 90 CSW but with this driving rain water is making its way past the seals and into the landy. I am (in the summer) going to replace the seals with the older rubber ones but does anyone know if its possible to get the blanking plates (the same as those fitted to models with air conditioning) - Paddocks and Craddocks have drawn a blank... (excuse the pun)

bustersbus · Dec 7, 2009

Make a template, cut some 1mm sheet and weld it in maybe?

Shifty1962 · Dec 7, 2009

My TD5 had air con (I say had because I took it out and flogged it on eBay to a bloke in Tanzania) but also has the opening vents. If they still wont seal then get some silicone and glue the bastards shut. They'll never leak again. I never use them anyway but mine dont leak for the moment so I'll leave well alone. Newer Defenders dont have them cut out of the bulkhead probably because LR realised that they always leak when the seal perish.

Graham Wilkinson · Dec 7, 2009

Try Land Rover spare parts and accessories | Landrover Series 1 and 2 Discovery Range Rover Freelander Company is called Buckley Brothers based in Darwen lancs, they do new parts but also break landrovers always sorted me out but best to phone them. Numbers on there website

tyclyd · Dec 8, 2009

Thanks Guys - I am going to try Grahams suggestion and Rimmers and Duckworths before sealing them up - they are usefull in the summer...

Defender Bulkhead Vents - Blanking Plates

tyclyd

Active Member

bustersbus

Well-Known Member

Shifty1962

Well-Known Member

Graham Wilkinson

Active Member

tyclyd

Active Member

Similar threads