Freelander 1 Dashboard

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

anubis757

Active Member
Posts
264
Location
Blandford
Hello all

Is it hard tro take dash out and then put it back again?
I need to see what is loose behind it , i ear like some piece broken and it goes to the left and right on turns.

Many thanks
 
The Ipack is easily removed.
The rest of the dashboard not so. It's an awful lot of work if you're not actually fixing anything.
 
My heater matrix has been leaking for many years.

I top up the coolant each week rather than pulling the dash and fixing it!

I wanted to replace the cigar lighter - just to get at that was a nightmare getting the old 1 out from the parts car, so in the end bodged the replacement (it was to power the dash cam) where I could get my fingers to behind the console and left the broken 1 in place.

The carpet under the mat is toast and the floor pan will probably rust out..... but I won't have to take the dash out :eek:
 
Back
Top