Confused over rear door stud types (facelift MK1)

RE: Rear, MK1 Facelift door card stud confusion:

There appears to be 3 types of pointed studs for the MK1 facelift door cards (see photo).
The front door card appears to need the small ones only.

The rear door card, however, appears to need two types. I can see the need for 9 pointed studs that insert into the yellow holes.

Rear door card stud requirements (my guess):
1) 9 x long studs, longer than the front (see comparison in photo)
2) 2 x re-inforced square based ones on each rear doors which the front don't have? - unknown part no.

I think 2) is probable as from memory, the re-inforced ones ripped out the rear metal door when the door card was yanked off. but I have no idea where they go back on. I've searched on the net and find any replacements (two are in good nick, two are mangled so I'll need to buy more). The dealer also says they have no idea what I'm on about.

Please can someone kindly scavenge their memory banks to see if they can remember which length of pointed studs go where on the rear doors, and see if they can guess where the square type base reinforced ones go as well?

Thank you for any ideas and sorry in advance for an annoying question that is probably impossible
to answer, but I was hoping as you're Landrover aficionado's, you'll have a better idea than anyone
else.

they are the first one you have but sorry I do not know how long I would think about 25mm

teddywood1 said:

they are the first one you have but sorry I do not know how long I would think about 25mm

Click to expand...

Thanks for the reply.

By ''the first one'', do you mean the first image in the photo of 3 studs, the square based (what I call re-inforced) ones, e.g the whole rear door card uses these?

Please see attachment.

Sorry for the hassle but I need to try and order the parts.

it is the thin one but around the handle area is the clip_2jpg

Thank you for your help, I'll have a go and see how far I get.