Complete set of ACE pipes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Thanks for letting everyone know, but to be quite honest, they're worth less than a second hand teabag, reason is they will more than likely corroded & to fit them will involve lifting body from chassis. But thanks again for letting us all know

Not really,a couple of 10mm compression fittings will help out in fitting,if they arent too rusty it could be a cheap job.But where the rear pipes are is a mystery....
 
Thanks for letting everyone know, but to be quite honest, they're worth less than a second hand teabag, reason is they will more than likely corroded & to fit them will involve lifting body from chassis. But thanks again for letting us all know

Not a problem ur probably right tho
it might come in handy for someone as well :D
 
Are you gonna buy em then? just in case?
No,fitting secondhand parts to customers cars is not what we do.(Unless they are on backorder or NLA)
From memory the cheapest of those pipes is around £70+Vat.Often its only where the pipe enters the valve block,(The green coating splits around the pipe flare) that they leak.So if just one pipe fails and one of the e-bay ones fixes it then its a cheap job.
 
No,fitting secondhand parts to customers cars is not what we do.(Unless they are on backorder or NLA)
From memory the cheapest of those pipes is around £70+Vat.Often its only where the pipe enters the valve block,(The green coating splits around the pipe flare) that they leak.So if just one pipe fails and one of the e-bay ones fixes it then its a cheap job.
Sorry, I only meant that comment as a bit of a joke, I know by your posts that you are well experienced with Landys, so please ignore my last comment. Its a good idea about using compression fittings, will keep that in mind.
 
Sorry, I only meant that comment as a bit of a joke, I know by your posts that you are well experienced with Landys, so please ignore my last comment. Its a good idea about using compression fittings, will keep that in mind.
No problem,I'm very aware that LR are in some case doubling parts prices and seemingly halving quality - anything that will lessen the pain,(Cost) of fixing LR's properly has to be worth looking at.
It is not the trade it once was....
 
Back
Top