Clutch problems

Monkey_man_tom · May 31, 2012

Hi just driven into London and out again in my 200tdi 90 and on the way back the clutch had no resistance until about an inch off the floor so had a lot of trouble changing gear, just checked fluid level and it is very low so obviously a leak somewhere is this just a matter o finding where it's leaking and solve that problem and top up fluid or do ya think it worse than that?

Cheers tom

uncle albert · May 31, 2012

Monkey_man_tom said:
Hi just driven into London and out again in my 200tdi 90 and on the way back the clutch had no resistance until about an inch off the floor so had a lot of trouble changing gear, just checked fluid level and it is very low so obviously a leak somewhere is this just a matter o finding where it's leaking and solve that problem and top up fluid or do ya think it worse than that?

Cheers tom

pos clutch arm pushed through on pivot, pain of job

300tdistu · Jun 1, 2012

Monkey_man_tom said:
Hi just driven into London and out again in my 200tdi 90 and on the way back the clutch had no resistance until about an inch off the floor so had a lot of trouble changing gear, just checked fluid level and it is very low so obviously a leak somewhere is this just a matter o finding where it's leaking and solve that problem and top up fluid or do ya think it worse than that?

Cheers tom

will be the clutch salve cylinder,
simple and cheap job to do
top up with fluid and bleed see if you can get the clutch back, if you can order a slave
if not report back

chezvegas · Jun 1, 2012

I have fou d they do leak a bit if they have been laid up for a while and then used again, mine did that when I got it. It's an easy job to bleed and he the pressure back. I check my every 2 weeks and give it a splash of a top up and it keeps going

Monkey_man_tom · Jun 1, 2012

Awesome cheers just one thing it's got disco 200 tdi engine gearbox n transfer box will that mean I'll need to order a disco slave cylinder or fender one?

jamesmartin · Jun 1, 2012

you need slave to match bell housing since yours is disco you need disco slave cylinder

Clutch problems

Monkey_man_tom

New Member

uncle albert

New Member

300tdistu

Well-Known Member

chezvegas

Active Member

Monkey_man_tom

New Member

jamesmartin

Well-Known Member

Similar threads