Chassis spring hanger holes

Does anyone know if the chassis (series 3 SWB) spring hanger holes are supposed to be off centre? Mine have become oversized and oval, so I was going to cut off the 'discs' welded either side of the hanger and weld on new ones with newly drilled holes. Problem is of the 4 hangers, 3 of them have off centre holes, the 4th has holes that are centred (within the disc)

centered the old ones have been repaired off center

jamesmartin said:

centered the old ones have been repaired off center

Click to expand...

Thanks! I'll spin some new discs off on the lathe tomorrow.

Or you could ream them, 32mm. I did that for mine.

Try a length of rod through all 4 dumb ,iron might be twisted or out of alignment after renewal.
PO bodge might have been to move centres.