phuckster
Member
- Posts
- 23
- Location
- Birmingham UK
Can anyone identify this pipe/hose?
- Thread starter phuckster
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
yes that is a vacuum hose and your piece of paper is hiding the tank that it fits onto the end, it looks like a bellow , this will effect you foot brake ,it will feel very hard to press.
hope this helps
hope this helps
phuckster
Member
- Posts
- 23
- Location
- Birmingham UK
hi thanks for your reply,
Is this the unit you were referring to?
If so there was another braided pipe connected to it. One that comes up by the maf and across?
Last edited:
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
hi no picture this time
Barry6690
Active Member
- Posts
- 183
- Location
- Tow Law, County Durham
I had some work done on mine, fitter fitted the one to the left (with the valve thing on it) to the in questions connection, sussed this out as I had a hard brake pedal, the question now is, where does the other pipe connect to.
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
yes that is the part it is a vacuum tank by all accounts it fits onto the bit of pipe coming out on the right I will look at mine today when it is light
MicaNielsen
New Member
- Posts
- 10
- Location
- Costa del Sol, Spain
Hi guys... Read this with interest as mine needs hose replacements, but not gonna go with the original Landy stuff. Instead I am looking to replace vacuum hoses with silicone ones. Anyone know the correct diameter of the pipe..?
Thx...
Thx...
teddywood1
Well-Known Member
- Posts
- 5,558
- Location
- stoke-on-trent
4mm try that I had some 5 mm but it felt loose
MicaNielsen
New Member
- Posts
- 10
- Location
- Costa del Sol, Spain
Thx mate, I'll try with 4 mm.....
