bulkhead to bonnet rubber seal

the rubber seal is missing from my 90, between the bonnet and the bulkhead gutter line.. I have fouind two rubber mouldings, both with moulded barbed channels one is side fixing, one is bottom fixing.

question is, what fixing, bottom, or side fixing, and do I fix to bonnet flange, or gutter flange.

thanks leemar.

It goes on the bulkhead gutter flange, certainly thats where i took mine off last week

top drive said:

It goes on the bulkhead gutter flange, certainly thats where i took mine off last week

Click to expand...

hi top drive,

thanks for reply, one other thing, is the gasket a hollow rubber tube, and does the tube fix on top of the gutter flange, or lay into the gutter flange, or fit facing the engine.

I have found two types, 1, the push fit is on the base of the hollow tube.
2, the push fit is on the side of the hollow tube
based apon your gasket, what one will I need,, thanks leemar.

The one i have is a push fit on the bottom, the slot in the seal pushes down onto the channel lip on the bulkhead.

top drive said:

The one i have is a push fit on the bottom, the slot in the seal pushes down onto the channel lip on the bulkhead.

Click to expand...

thanks for that, have ordered two meter length for Tuesday