Broken CB

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Co-Pang-Yang

Well-Known Member
Posts
2,930
Location
Colchester, Essex
Hi all.

Recently got hold of a Motorola GM950 cb radio for the landy.
Now it was removed from a large recovery truck in which it was working perfectly.
Since fitting it in mine (and tried it wired directly to a 12v battery) all it will do when you press the transmit button is beep at you repeatly.
Can change the channels but thats about it, can't communicate with anyone through it.
The only thing i can think of is the fact its now running off 12v instead of 24v on the recovery truck.
Should have an SWR meter by the end of the week but in the mean time anyone got a suggestions on what to check. Or has anyone delt with this problem before? Any suggestions??

Any advice would be greatly appricated.
Cheers chris.
 
Have you asked Dan nicely, I'm sure he said he brough 3 sets a few months ago. He certainly wont need one for a long time, if he is coming with me on Sunday he may well be up for a temporary loan. Other than than have you tried fleebay?
 
Back
Top