Brembo and the VOGUE TD6??

hi

will these Brembo Brakes fit my Vogue TD6 53 plate, I will link 2 brakes for you to look at ,

looking to upgrade the front braking system and get drilled discs,

thanks all,

Land Rover Range Rover 3 sport L322 BREMBO CALIPERS on eBay (end time 03-Jul-09 18:05:52 BST)


second brakes:
Land Rover Range Rover 3 Supercharged BREMBO CALIPERS on eBay (end time 11-Jul-09 17:32:28 BST)

also these discs:
BREMBO DRILLED GROOVED BRAKE DISCS RANGE ROVER TD6 4.4 on eBay (end time 07-Jul-09 13:25:37 BST)

This is the reply of the first calipers:

"Hi, yes these are of a sport, I belive it was an 06 3.0L deisel .... not sure if they will fit yours.. If its any help I know that the bolt fixings (that bolt the caliper to the hub) centre to centre is 13.8cm... Hope that helps",

Dont they do brembo for the rangie?

Yes they do make them for a range Rover, just wondered if they would fit my model, Thanks

dazrangerover said:

Yes they do make them for a range Rover, just wondered if they would fit my model, Thanks

Click to expand...

I think the sport and D3 share running gear, suspect the l322 is different.Are the brembo brakes off a supercharged rangie brembo?Bet they stop well any way.

There were changes to L322 running gear around 05. Not sure what was involved but from then on the wheels were compatible with Discover 3 & Range Rover Sport, which they weren't prior to that, so it suggests the hubs are different.

I read an article in LRO detailing the upgrade on a Disco 3 to the Brembos from a RR Sport. It was almost a straight swap all bar from changing the caliper mount.
Probably no help to you at all, but could be a clue.

Bump anyone?

No one?

As I said earlier I doubt they will bolt straight on, you will probably have to change the hubs and part of the suspension, and possibly the wheels,. Even if they do fit, I think you will need the discs to match, not just the callipers. I susupect they will need a lot more fluid moving, so you may need to change the Master cylinder and ABS modulator etc, this would probably mean reprograming an ECU aimer. Then we come to the front to rear balance. Do Brembo braked vehicles have the same rear brakes? Even if you do, do you need to reprogram the ECU to make sure the anti lock brakes, dynamic stability control and emergaency break assists still work correctly.. If you do have to change the hardwear for the rear brakes, bear in mind that all Brembo braked models have an electronic park brake.
I have no idea if it is feasible, evidently from the lack of replies, nor has anyone else, but I doubt it's a bolt on job.