MacGyver
Active Member
- Posts
- 56
- Location
- Northern Ireland
PLEASE READ THE FULL ADVERT BEFORE SENDING PM'S, PM ME IF YOUR WANTING TO RESERVE / ORDER A SET.
Freelander 1 solid 260mm front
Drilled & Grooved with black coating
RRP £79.00 discounted £65.00
Freelander 1 276mm vented front
Drilled & Grooved with black coating
RRP £81.00 Discounted £67.00
Freelander 2 solid 300mm front
Drilled & Grooved with black coating
RRP £104.00 discounted £82.00
Freelander 2 316mm vented front
Drilled & Grooved with black coating
RRP £111.00 Discounted £90.00
Freelander 2 rear 302mm manual handbrake
Drilled & Grooved with black coating
RRP £97.00 discounted £79.00
Freelander 1 302mm electric handbrake
Drilled & Grooved with black coating
RRP £115.00 Discounted £91.00
I've several sets here now ready to go. The prices of the Freelander 2 discs I got where very good, and would make a nice saving to anyone doing a complete change.
All include uk postage, PayPal fees etc, prices are firm and set so no offers, PER PAIR 1 x Offside + 1x Nearside
DISCS ONLY. PADS NOT INCLUDED.
I did a group buy on Mtec discs before Christmas and a several people dropped out, leaving me with multiple left over sets.
Now these where originally MG Rover only, but a few people had other Land Rover FL1 & Fl2 vehicles so we got them involved also but unfortunately a pile of them pulled out, did PayPal refunds, all sorts of moves and left me holding an absolute mountain of stuff that I don't need.
These are brand new, in packaging etc. You have probably seen this via my Instagram or Facebook pages or maybe in the Irish groups.
Been selling these for months now, getting through the stock and had forgotten to post on Landyzone about the FL1 & FL2 sets.
I'd been holding onto them for my own Rover cars, fitting onto cars I've been buying and selling etc, but now with ivf payments looming and a recent theft from my shed of personal Rover 75 items, I really really need to clear these out.
Plus I'm loosing my heated storage in next few months, so again I'd rather other enthusiasts benefit from it. I've already lost enough money over them all so I'm only charging exactly what was paid at the time.
As listed I have multiple "sets" meaning a disc of each side in a pair. Remember the black coat of 2 discs is usually £14 alone (or £28 for 4 discs) so you can see these are all big savings for coated discs.
Mtec coat them in heat resistant treatments, and great for preventing visual rust on discs anywhere a pad doesn't make surface contact.
This is especially handy if like me you don't drive certain cars for a time and it keeps their running gear looking fresher.
Prices based on the website 4/3/2022. Unless they are marked SOLD OUT then I still have pairs left.
Here are some of the examples from my Rover 75 and MG vehicles.
These are the only brand I use on all my fleet, they are made and coated here in Northern Ireland, and I've had a brilliant relationship with the company for years.
Ive done videos of fitting them on my YouTube channel on my 75s for front / rear / handbrake adjustment and also the correct direction to fit them. Please note the set in my videos where uncoated, a decision based on my finances at the time before this group buy.
If anyone would like some give me a shout. Colin
Freelander 1 solid 260mm front
Drilled & Grooved with black coating
RRP £79.00 discounted £65.00
Freelander 1 276mm vented front
Drilled & Grooved with black coating
RRP £81.00 Discounted £67.00
Freelander 2 solid 300mm front
Drilled & Grooved with black coating
RRP £104.00 discounted £82.00
Freelander 2 316mm vented front
Drilled & Grooved with black coating
RRP £111.00 Discounted £90.00
Freelander 2 rear 302mm manual handbrake
Drilled & Grooved with black coating
RRP £97.00 discounted £79.00
Freelander 1 302mm electric handbrake
Drilled & Grooved with black coating
RRP £115.00 Discounted £91.00
I've several sets here now ready to go. The prices of the Freelander 2 discs I got where very good, and would make a nice saving to anyone doing a complete change.
All include uk postage, PayPal fees etc, prices are firm and set so no offers, PER PAIR 1 x Offside + 1x Nearside
DISCS ONLY. PADS NOT INCLUDED.
I did a group buy on Mtec discs before Christmas and a several people dropped out, leaving me with multiple left over sets.
Now these where originally MG Rover only, but a few people had other Land Rover FL1 & Fl2 vehicles so we got them involved also but unfortunately a pile of them pulled out, did PayPal refunds, all sorts of moves and left me holding an absolute mountain of stuff that I don't need.
These are brand new, in packaging etc. You have probably seen this via my Instagram or Facebook pages or maybe in the Irish groups.
Been selling these for months now, getting through the stock and had forgotten to post on Landyzone about the FL1 & FL2 sets.
I'd been holding onto them for my own Rover cars, fitting onto cars I've been buying and selling etc, but now with ivf payments looming and a recent theft from my shed of personal Rover 75 items, I really really need to clear these out.
Plus I'm loosing my heated storage in next few months, so again I'd rather other enthusiasts benefit from it. I've already lost enough money over them all so I'm only charging exactly what was paid at the time.
As listed I have multiple "sets" meaning a disc of each side in a pair. Remember the black coat of 2 discs is usually £14 alone (or £28 for 4 discs) so you can see these are all big savings for coated discs.
Mtec coat them in heat resistant treatments, and great for preventing visual rust on discs anywhere a pad doesn't make surface contact.
This is especially handy if like me you don't drive certain cars for a time and it keeps their running gear looking fresher.
Prices based on the website 4/3/2022. Unless they are marked SOLD OUT then I still have pairs left.
Here are some of the examples from my Rover 75 and MG vehicles.
These are the only brand I use on all my fleet, they are made and coated here in Northern Ireland, and I've had a brilliant relationship with the company for years.
Ive done videos of fitting them on my YouTube channel on my 75s for front / rear / handbrake adjustment and also the correct direction to fit them. Please note the set in my videos where uncoated, a decision based on my finances at the time before this group buy.
If anyone would like some give me a shout. Colin
Last edited:
