Brake problem

lazydog · Oct 17, 2011

New pads all round Mintex once I have used the brakes they are fine all day but first time i brake hard rear N/S locks up.If I lift off and brake again no problems,pistons not seized and new fluid and discs are not scored.
Any clues to the problem 300 Tdi non ABS

lazydog · Oct 17, 2011

also good springs and dampers and Fedima Extreme 265/70/18 tyres

Mr Noisy · Oct 17, 2011

Check your wheel bearing, also check the pads are seated properly and the piston are not corroded/seized (often happens when old pistons are retracted fully into the Caliper)

Brake problem

lazydog

Well-Known Member

lazydog

Well-Known Member

Mr Noisy

Coming in your ears.

Similar threads