Big single/three phase TIG for sale

NOW ON EBAY!


http://www.ebay.co.uk/itm/161027900092?ssPageName=STRK:MEBIDX:IT&_trksid=p3984.m1426.l2648




Having to sell my big welder just bought it so a little gutted but found out that due to the fact that it draws so much power and we have a guest house it'll be useless for most of the day if people are watching TV's or having a shower etc



Gutted to say the least so would like back what I paid for it plus a some of the fuel I wasted so £505 or an offer

I can deliver anywhere for fuel cost as it'll fit in my big trailer (padded too) so as long as you have an engine crane or 3 strong people to help lift it out it'll be fine


Comes with the big Paraweld water cooler which is near new from the looks of things and also comes with tungstens, shrouds and a beefy foot pedal!

Sorry to here that Doc. But several told you that before you bought it, and you told us differently

hell that was quick even for you doc

Argh tempted but just can't afford ATM

It will run on single phase and would be fine if the place was empty but then it becomes a little hit and miss on how much time I can use it for

Plan is to sell it and buy a little Miller Dynasty later in the year once I save up a bit more




The old stick welder with 7018's will be more than enough for making stuff with

200tdi ayre said:

Argh tempted but just can't afford ATM

Click to expand...

Dude if you want it I'm happy to take a small deposit and stick it in the shed til you're next in kendal then drop it off with you?

It's going to need a big single phase supply.
The plate in your pic has it down as 125amp at 220volt which is a bit much when a domestic/small commercial supply is rarely more than 100amp and quite often 60/80amp

We have 100A at home but I cant use all of that all day so too hit and miss on times to bother with

Dr_evil said:

We have 100A at home but I cant use all of that all day so too hit and miss on times to bother with

Click to expand...

could you not get a voltage step up transformer to get the power you need?

Not cheap enough, would rather sell and get what I paid back then save up towards a nice Miller Dynasty then keep it

Dr_evil said:

We have 100A at home but I cant use all of that all day so too hit and miss on times to bother with

Click to expand...

are you sure i have a 100amp 3 phase ,fused as such except it isnt with been at the end of the line ,luckily i do have another 3 phase supply

jamesmartin said:

are you sure i have a 100amp 3 phase ,fused as such except it isnt with been at the end of the line ,luckily i do have another 3 phase supply

Click to expand...

Its single phase at home, pity as its an arse of a problem


Electrician was out today to look at it, only got one big fuse in the meter box so single

Thor1950 said:

could you not get a voltage step up transformer to get the power you need?

Click to expand...

That wouldn't work, the power available wont change as you step the voltage up. You'll loose a little bit of available power through the losses in the transformer.

And generally the power required will be greater at a higher voltage.

davethsparky said:

That wouldn't work, the power available wont change as you step the voltage up. You'll loose a little bit of available power through the losses in the transformer.

And generally the power required will be greater at a higher voltage.

Click to expand...

Just asking is all

This will run on any voltage btw and I've got the wiring diagrams and manual for it

Need it gone guys, surely someone with a 3 phase or single phase workshop needs a monster like this

if you wasnt so far away Id have it to go in the dirty bit of the w/shop

I can pallet it for £40 ? or possibly less !

Bump

Dr_evil said:

Need it gone guys, surely someone with a 3 phase or single phase workshop needs a monster like this

Click to expand...

No, your stuck with it