BCEM re sync to ECU Urgent, please

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Stevetheplant

Member
Posts
58
Location
Stebbing, near Dunmow
Hi All,
After getting the engine disabled status yesterday, Mozzy kindly talked me through the various sequences to try and get me going again. Unfortunately we had no luck and I continued his instruction well into the evening and again this morning. I have 2 kids who I eventually had to organise a taxi to get them home last night, and had to make 2 very cold nd wet, 14 mile, round trips to get them both t oschool this morning (on my old Katana). Mozzy finally concluded the problem lies with the BCEM and ECU being out of sync and suggested I post on here for some help with 'diagnostics' to rectify the problem. I'm between Bishops Stortford and Harlow, slightly out of the way of busses etc, so am desperate to get the car going (P.S. also a single parent). Any help would be so much appreciated. Steve
 
Look at the 'everything you need to know' sticky in this section and click on the map link. Look for red circles with lightening flash symbols near you. These are the folk with diagnostics. Bit tricky to do on my phone else I'd look for you. If you click the icons it should tell you what they've got and you can pm those that may be able to help. If it's very urgent pm me the names and I'll try and contact them by phone.
 
OK Syncmate is all he needs. Although Nanocom will also do it. A Syncmate in the glove box is worth it's weight in gold at a time like this.
 
Back
Top