crookedspireite
New Member
- Posts
- 509
- Location
- dunno im lost
av replaced all me UJs on me props and done my the input flange bearings in the diff and the fookin fing is still vibrating when acceleratin, any idea what ta check next anyone?
what a coincidence, i was gonna post a thread with that exact heading today. I've got a vibration that I'm feeling through my feet, and it's not the UJ's as well. It vibrates quite alot when lifting off between 40 and 30. Disappears when you knock the gearbox into neutral.
DOes anyone know if a gearbox bearing might be on it's way out. (or xfer box)
Adsey
av replaced all me UJs on me props and done my the input flange bearings in the diff and the fookin fing is still vibrating when acceleratin, any idea what ta check next anyone?
Hey Ratty. Its a bit of a long shot but would knackered engine mountings give him vibration on acceleration?
If he was to start the engine, pop the bonnet and stick someone in the car, he could get them to sling it in gear and bring their foot up on the clutch to check for any movement.
Whilst bein stood in front?
Hopefully the new uj's will allow the handbrake to hold.
You can stand at the side if ya want to. On the side of the motorway I prefers to be stood in front. A car at 1/2mph is definately slower than a car at 70mph.
I see now
Just had visions of him gettin someone to rev her up then drop the clutch, stead of fidin the bitin point genkle like.
Ya could always jess not fix it. Lady passengers likes a bit of vibration
aledgedly.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!