axel oil seals

hi, i own a 1991defender and ive done oil seals in the axel as they wer leaking. now they are still leaking on both sides! can an1 help me as my head is bursting?

check your breather isn't blocked.

where is breather? is it on top of axels?

yes.
remove the banjo union and check that it's clear, then blow the pipe through too.

when you say axle seals. which ones have you changed? there is an axle seal in the stub axle as well as either end of the hub before/after the bearings.

just checking.

G

banjo onion? r u taking the mic?

ive replaced inner and outer seals and paper gasket

there is ment to be a metal cone with a rubber washer or seal. not doing it myself so not to sure!

waynereid said:

hi, i own a 1991defender and ive done oil seals in the axel as they wer leaking. now they are still leaking on both sides! can an1 help me as my head is bursting?

Click to expand...

:welcome: to LZ

no!

if yours is an early one, it might have a little valve with a spring-loaded ball in it. If so, check that's clear / free to move.

595478 AXLE BREATHER BANJO BOLT | shop | www.lrseries.com | L. R. Series

sounds like you need to do the seal thats attached to the stub axle.

and he said union not onion. just undo the breather and you will see

G

waynereid said:

ive replaced inner and outer seals and paper gasket

Click to expand...

Inner and outer hub seals or axle seals?

was thinking it was an earlyer 1, mibby sumbody replaced it?

hub seals i think

waynereid said:

hub seals i think

Click to expand...

well that's the wrong ones.
still check yer breather though.

halfshaft seals

make yer mind up

will check breather. thanks 4 ur time and help! cheers

suck my dick ass hole. im no the 1 who is fixing it! ****n ****. bet ur english.

waynereid said:

suck my dick ass hole. im no the 1 who is fixing it! ****n ****. bet ur english.

Click to expand...

wtf?!