anyone HELP! plEASE auto gearbox split from the engine!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
there is a plate at front of gear box rear of engine sump ,remove and turn engine around with a screw driver on ring gear or spanner on front pulley ,there are 4 bolts 13mm socket need ,then undo everything secured to box, center consol,selector lever, props,kick down cable at throttle bracket,hand brake cale at lever,bell housing bolt ,mounts etc,support engine with vehicle jack on panhard rod upto front of sump
 
there is a plate at front of gear box rear of engine sump ,remove and turn engine around with a screw driver on ring gear or spanner on front pulley ,there are 4 bolts 13mm socket need ,then undo everything secured to box, center consol,selector lever, props,kick down cable at throttle bracket,hand brake cale at lever,bell housing bolt ,mounts etc,support engine with vehicle jack on panhard rod upto front of sump


i fink your wasting your time ........ sounds like he wants you to pop over and do it for him .............. or perhapes he been shagging to many sheep
 
there is a plate at front of gear box rear of engine sump ,remove and turn engine around with a screw driver on ring gear or spanner on front pulley ,there are 4 bolts 13mm socket need ,then undo everything secured to box, center consol,selector lever, props,kick down cable at throttle bracket,hand brake cale at lever,bell housing bolt ,mounts etc,support engine with vehicle jack on panhard rod upto front of sump
thanks il av a go tomorrow :)
 
Back
Top