Advice needede please.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
generaldogsbody

generaldogsbody

Active Member
Posts
389
Location
North west england.
When i lock or unlock my disco 2 v8,the imobiliser light doesn't flash.It doesn't flash at all,does this mean the imobiliser is turned off.I'm trying to program a new key fob,i need the imobiliser to be working or i can't match the new fob.Is it possible the imobiliser is turned off.
 
Found out why my key won't open the door,i took the door card off.Someone smashed the glass at some time before i bought it.When they put the new glass in they must have took the actuator off,when they put it back on they didn't put the bar back in that goes from the key hole to the actuator.Bought a used door hanble with the part i need,when it's fixed do you think i could reset my alarm and get the imobiliser light to flash.Some replies would be nice,thanks.
 
Last edited:
generaldogsbody said:
do you think i could reset my alarm and get the imobiliser light to flash.Some replies would be nice,thanks.
Click to expand...
You can synk a fob regardless of the immobiliser's setting as long as the vehicle is not immobilised cos the central locking works either way, there can be various options for the alarm/immobiliser some of them only for the LED's behaviour... the only way to see or modify the settings is with nanocom or similar(dedicated tester). If it's immobilised you have to remobilise it with EKA code then work with it
 
The light might be disabled, that synking device works with vehicles on factory setting which seems that your's is not so you need to plug in a nanocom or similar to check the settings
 
sierrafery said:
The light might be disabled, that synking device works with vehicles on factory setting which seems that your's is not so you need to plug in a nanocom or similar to check the settings
Click to expand...
When i removed the door card,the bottom of the door was full of glass.The window was once smashed,do you think it might be something to do with that.
 
Fixed my door,i can now lock with fob or the key.Still cant sync my new keyfob.Its something to do with the immobiliser on the dash.Looks like i'll have to buy a nannocom.Is there any cheaper than this what can do the job.Ps got the EKA code,but i,m not sure if one of the other owners have changed it,i'm not gonna mess with it until sure.i dont want to immobilise it.
https://www.ebay.co.uk/itm/Nanocom-...iscovery-2-V8-Diagnostics-NCOM04/231185687716
 
Last edited:
You must log in or register to reply here.

Similar threads

F
Disco 1 Immobiliser issues
Replies
11
Views
2K
discool
discool
G
Td5 central locking (another one)
Replies
3
Views
835
sierrafery
sierrafery
D
Disco 2 td5 fuel purging doesn't work?
Replies
10
Views
676
Kev12
Kev12
Corne215
re programing my remote key 1998 300tdi
Replies
2
Views
648
D1Nut
D1Nut
C
D2 2004 td5 no start immobiliser
Replies
1
Views
796
Chips666
C
Back
Top