- Posts
- 162
- Location
- near sheffeild, derbyshire
should there be any play in the aframe ball joint or not?
cheers
cheers
a-frame ball joint
- Thread starter dirty tom
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,232
- Location
- Embasinga stocæ
no
- Posts
- 162
- Location
- near sheffeild, derbyshire
ok cheers
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
wot Daft says, wiv a cherry on top.
Becks Bear
Active Member
- Posts
- 245
- Location
- Northern Ireland
hello
dont want to steal this thread, but how long should a new a frame ball joint last?
i fitted a new one 8 months ago not OEM and its fooked, what could casus this? the landy is used off road (quite alot)
Thanks
dont want to steal this thread, but how long should a new a frame ball joint last?
i fitted a new one 8 months ago not OEM and its fooked, what could casus this? the landy is used off road (quite alot)
Thanks
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
Cheap and nasty parts from the likes of paddocks. Get the decent quality stuff it only costs a bit more but lasts ten times as long.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,080
- Location
- Kernow - Near England
well, mine did last 12 months (****part).
Becks Bear
Active Member
- Posts
- 245
- Location
- Northern Ireland
hughesy
i didnt know it was ****epart, in fact i had thought i bought a good one from a landrover dealer 22quid plus vat, it was in a plastic bag no writing on the bag, so i dont know a fook what i bought. i know one thing i will not be back in that shop
new one will be geniune landrover part
many thanks
i didnt know it was ****epart, in fact i had thought i bought a good one from a landrover dealer 22quid plus vat, it was in a plastic bag no writing on the bag, so i dont know a fook what i bought. i know one thing i will not be back in that shop
new one will be geniune landrover part
many thanks
sypher
Well-Known Member
- Posts
- 1,997
- Location
- Forest of dean
Its not the adjustable type for that price is it ? ( big slot in the top of it )
Becks Bear
Active Member
- Posts
- 245
- Location
- Northern Ireland
NO, just a normal ball joint, i have seen the same type on fleaby and they where as cheap as chips
reading into your question then i paid to much??????
well you live and learn
"no point in getting older if i dont get wiser"
reading into your question then i paid to much??????
well you live and learn
"no point in getting older if i dont get wiser"
sypher
Well-Known Member
- Posts
- 1,997
- Location
- Forest of dean
Nar just depends where you buy from tbh m8 , you may of had one that wasnt assembled correctly from the factory ( not enough preload ) so it failed very soon . Ive fitted a few in the past that has lasted Ages
Becks Bear
Active Member
- Posts
- 245
- Location
- Northern Ireland
sypher
thanks for the reply, one thing is for sure u cant drive the landy without one of these ball joints
its just a pain in the arse having to press them out and in
thanks for the reply, one thing is for sure u cant drive the landy without one of these ball joints
its just a pain in the arse having to press them out and in
TheVengefulElephant
Well-Known Member
- Posts
- 6,527
gotta replace mine soon 
