Orch
Active Member
- Posts
- 626
- Location
- Salisbury area
Morning all,
Will be going to look at a few D2s at the weekend so just preparing myself. Have done a fair bit of research so hopefully this won't be one those annoying noob posts. Sorry if it is
My check list so far stands as:
Check condition of all body panels
Chassis, boot floor, door sills for rust/damage repair
Check above rear door for signs of water getting in
Brake discs, lines and pads (condition?)
Condition of exhaust system
Check diffs, transfer box and sump for leakages.
Check fuel pressure regulator for leaks
Check to see if ACE present and check pipework
Check injector loom for oil inside the plug at ECU end
Check ALL electrics work
Look for signs of leaking around sunroofs or saggy roof lining
If airbag suspension check for leaks, check pump starts up when engine started, check ride height sits level.
Check aircon blows cold
and of course generally how drives and handles.
My questions are
1) where abouts in the bay do I spot the fuel pressure regulator? I'm sure I'll find it but would save me fishing around for minutes.
2) As I understand it I'll know if it has ACE if the reservoir on the near side has two chambers, and apparently you can see the pipework in the near side wheel arch (?) but is there a pump somewhere I should be checking for leaks?
3) What tools do i need to take to get under the sea of plastic covers in the engine bay? I'd rather just the right spanner or two rather than lugging the whole tool box with me.
4) Regarding checking the red ECU plug for signs of oil from the injector loom, is it ok to just whip it out? I don't need to remove the battery first? And it won't do any harm to the car by unplugging and refitting? (stupid question I'm sure)
5) Anything else I've missed?
Models I'm looking at will be 1999/2000 GS models.
Thanks
Will be going to look at a few D2s at the weekend so just preparing myself. Have done a fair bit of research so hopefully this won't be one those annoying noob posts. Sorry if it is
My check list so far stands as:
Check condition of all body panels
Chassis, boot floor, door sills for rust/damage repair
Check above rear door for signs of water getting in
Brake discs, lines and pads (condition?)
Condition of exhaust system
Check diffs, transfer box and sump for leakages.
Check fuel pressure regulator for leaks
Check to see if ACE present and check pipework
Check injector loom for oil inside the plug at ECU end
Check ALL electrics work
Look for signs of leaking around sunroofs or saggy roof lining
If airbag suspension check for leaks, check pump starts up when engine started, check ride height sits level.
Check aircon blows cold
and of course generally how drives and handles.
My questions are
1) where abouts in the bay do I spot the fuel pressure regulator? I'm sure I'll find it but would save me fishing around for minutes.
2) As I understand it I'll know if it has ACE if the reservoir on the near side has two chambers, and apparently you can see the pipework in the near side wheel arch (?) but is there a pump somewhere I should be checking for leaks?
3) What tools do i need to take to get under the sea of plastic covers in the engine bay? I'd rather just the right spanner or two rather than lugging the whole tool box with me.
4) Regarding checking the red ECU plug for signs of oil from the injector loom, is it ok to just whip it out? I don't need to remove the battery first? And it won't do any harm to the car by unplugging and refitting? (stupid question I'm sure)
5) Anything else I've missed?
Models I'm looking at will be 1999/2000 GS models.
Thanks