A-Bar from Rebel 4x4

popotla · Mar 27, 2009

I need an A-Bar for my air-con Defender 110.

Was looking at the one marketed by Rebel 4x4. Are these reliable and trustworthy people, both in terms of the quality of what they sell and delivering what they say theyll deliver when they say theyll do that?

(I asked them about another item, too, but they arent in a big hurry to reply).

life2short · Mar 27, 2009

find someone else........I got that same respone a while back from them!

ratty · Mar 27, 2009

They had a query with something I ordered one day and rang me up to check that the order was correct rather than send out the wrong item.

They also cocked up an order for some side steps on another occasion. They sent me out a set for a 90 instead of a 110. I rang them to tell them about their mistake. They had the correct set out to me the next day and took the wrong ones back. All in all I can't complain.

wiltshire landyman · Mar 27, 2009

i found them spot on..next day delivery cant argue with that

YorkshireSteve · Mar 31, 2009

I ordered my steering guard from them a while back and, despite it ending up at City Link without a label, they seemed quite keen to help locate it! Eventually got it but needed to grind of a load for the track rod (or whichever one it is at the front) as it wouldn't fit.... Not sure it this is a design fault or oversight, but seemed a little wrong that I had to modify it even though it was supposed to be the right one for my motor!

muckmuck · Mar 31, 2009

Hi there ive ordered many parts from rebel over the past couple of years and never had any problems wot so ever,dont forget to ask for your free gift if you spend over 50 quid

ratty · Mar 31, 2009

YorkshireSteve said:
I ordered my steering guard from them a while back and, despite it ending up at City Link without a label, they seemed quite keen to help locate it! Eventually got it but needed to grind of a load for the track rod (or whichever one it is at the front) as it wouldn't fit.... Not sure it this is a design fault or oversight, but seemed a little wrong that I had to modify it even though it was supposed to be the right one for my motor!

Do you mean the drop arm? Mine just catches on full lock. As it's galvanised I'm reluctant to grind it. I might get around to bending it out the way one day.

YorkshireSteve · Mar 31, 2009

No, it's definitely the shorter one of the two steering rods... Had to take about half an inch out of the way for it. Could be something to do with the lift I guess...

A-Bar from Rebel 4x4

popotla

Active Member

life2short

New Member

ratty

I'm not special I'm limited edition

wiltshire landyman

I’m back

YorkshireSteve

New Member

muckmuck

Active Member

ratty

I'm not special I'm limited edition

YorkshireSteve

New Member

Similar threads