Took gearbox out of 90 and tried to select low and it wont go in all the way.
Had this trouble when it was in the 90, it would go in just about but pop out after a few yards, I thought this was due to a worn linkage but cant seem to get it to engage low properly even tapped it with a hammer and socket bar.
It engages but pops out again, is it worth taking the cover off or shall I bin it, seems a shame as its a 1.4.
In picture its just engaged so not bottoming out on the casing
Had this trouble when it was in the 90, it would go in just about but pop out after a few yards, I thought this was due to a worn linkage but cant seem to get it to engage low properly even tapped it with a hammer and socket bar.
It engages but pops out again, is it worth taking the cover off or shall I bin it, seems a shame as its a 1.4.
In picture its just engaged so not bottoming out on the casing