300tdi mods, which should I do.....

Luigi Vampa · Dec 7, 2010

The time has come to upgrade my trusty disco, I have some mods in mind. would like some advice from the experts as to which (if not all) are a good idea....

30mm wheel spacers, not for any other reason than I want a bit more "presence" on the road.

de-cat sports exhaust, the one which removes the front silencer aswell.

de- egr, complete kit.

alt belt tensioner, as the tensioner is "squealing"

Also, replace all filters, liquids.

Any others I should think of?

nathan5346 · Dec 7, 2010

:doh:

Lyndon · Dec 7, 2010

snorkel and breathers no point in looking bad ass if you cant drive bad ass

paul_c · Dec 7, 2010

Some of the items you have listed are basic servicing/maintenance. So they should always be done in a timely manner, not looked upon as modifications or upgrades!

The others you have listed have no effect except to lighten your wallet.

Its your money - spend it how you like!!!!!!

MikeDISCO · Dec 7, 2010

Clean out sedimentor, clean out inlet manifold, flush rad and intercooler, replace turbo hoses and the squealing will be cured with the penny trick

Luigi Vampa · Dec 7, 2010

yeah, I know the tensioner, filters etc, are service stuff, have searched about the spacers, get loads of conflicting answers....

The de-cat and de egr stuff is prob the most useful, the spacers are purely cosmetic.

Luigi Vampa · Dec 7, 2010

wondered about the penny trick, remember looking at that a while ago, will try it tomoz.

Cheeksgt · Dec 7, 2010

The penny tric turned into the 12mm washer trick for me. the penny wasnt quite thick enough. lol.

storm99 · Dec 7, 2010

Cheeksgt said:
The penny tric turned into the 12mm washer trick for me. the penny wasnt quite thick enough. lol.

Probably a worn down scottish coin then.

davek0974 · Dec 8, 2010

Just buy this...

1992 LAND ROVER 90 DEFENDER TURBO DIES BLACK on eBay (end time 13-Dec-10 20:18:51 GMT)

hughesy · Dec 8, 2010

One of those tyre tread stickers down the side and some britpart mudflaps, and a poorly fitting sad arse home made snorkel. Cool.

Luigi Vampa · Dec 8, 2010

Ok, so if I bin the spacers, are the rest more acceptable???

davek0974 · Dec 8, 2010

Now your'e thinking straight

thebiglad · Dec 8, 2010

Luigi Vampa said:
The time has come to upgrade my trusty disco, I have some mods in mind. would like some advice from the experts as to which (if not all) are a good idea....

30mm wheel spacers, not for any other reason than I want a bit more "presence" on the road.

de-cat sports exhaust, the one which removes the front silencer aswell.

de- egr, complete kit.

alt belt tensioner, as the tensioner is "squealing"

Also, replace all filters, liquids.

Any others I should think of?

The only comment I would make is forget the wheel spacers - they will cause you nothing but trouble.

If you want the Disco to look more "impressive" - have it lifted, with bigger tyres and it'll look good. Set you back about a grand though?

The other stuff is just good routine maintenance on a TDi 300 and should all be done - tomorrow

Paddock spares will provide you with a filter kit (air oil and fuel) for£6.50+vat; a de-cat pipe for £16+vat; a de-EGR kit for £5+vat and free delievery to you if you order is over £50.

Ellon is a nice town, we used to stay near Turriff.

Cheers
Dave

hammoj28 · Dec 8, 2010

storm99 said:
Probably a worn down scottish coin then.

Na, Scottish coins dont change hands enough to get worn down.

thebiglad · Dec 8, 2010

hammoj28 said:
Na, Scottish coins dont change hands enough to get worn down.

Some of the kindest and most generous people I know are from the North East, Turriff, Huntly Keith, Fyvie etc.

Dave

disco95 · Dec 8, 2010

hammoj28 said:
Na, Scottish coins dont change hands enough to get worn down.

just the fivers the state i get them in the, bank aint making new ones

Luigi Vampa · Dec 8, 2010

Thanks Big Lad, I have family in Turriff, my uncle owns both petrol stations there.

jamesmartin · Dec 8, 2010

90/110 front down pipe with out cat is a straight replacement only £15 ,you only need to put a blank sheet of metal between egr valve and turbo ,only fit spacers for wheels if fitting appropiate wheels with correct offsets as you need to have steering center through tyre center unless you want to make the steering dangerous ,put engine to no1 tdc fit timing pin or 9mm drill in injection pump pulley and through into pump loosen 3 x 8mm bolts (10mm socket size) put spanner on pump nut turn clockwise until pushing against timing pin ,tighten 3 x bolt havent found many that dont run better after. fit a set of britpart heavy duty springs and gas shockers std hieght less than £200 and make a big improvment to ride,bearmch used to do similar

Luigi Vampa · Dec 8, 2010

Cheers James, Filters done today, exhaust bits ordered, new lift pump ordered, got a bunch of oil leaks to fix, (I know Landrover are not known for their ability to keep the oil on the inside of the engine, but her indoors is mumping about the black marks on the drive!!!) Will try the timing tweek, done the rear springs and shocks about 1000 miles ago. Will think about doing the front ones soon. Anything else I should be thinking of?

300tdi mods, which should I do.....

Member

Well-Known Member

Active Member

New Member

Well-Known Member

Member

Member

Member

Spreading Joy & Harmony

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

New Member

Member

Well-Known Member

Member

Similar threads