3.9 4.2 or 4.6

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
i would go for a 4.6 every time am currently building one for myself and have just done one for a customer see my web site.
as regardes the ecu are you on hot wire fuel injection? if so no problems if not then factor this into the upgrade the 3.5 flapper is very limited tunning while the 3.9 hotwire system is better ans will adpt to the 4.6 lungs
 
vougese39 said:
i would go for a 4.6 every time am currently building one for myself and have just done one for a customer see my web site.
as regardes the ecu are you on hot wire fuel injection? if so no problems if not then factor this into the upgrade the 3.5 flapper is very limited tunning while the 3.9 hotwire system is better ans will adpt to the 4.6 lungs
Click to expand...

spam spam spam
 
vougese39 said:
i would go for a 4.6 every time am currently building one for myself and have just done one for a customer see my web site.
as regardes the ecu are you on hot wire fuel injection? if so no problems if not then factor this into the upgrade the 3.5 flapper is very limited tunning while the 3.9 hotwire system is better ans will adpt to the 4.6 lungs
Click to expand...
4.6 slippy liner, cracked porus block engine.No.
 
spam it is not!!
yes the 4.6 has slipped liners and cracked porus block but if you have the top hat linners fitted this will cure the problem and if it is fitted to a classic with a open loop emissions set up it will not happen again
 
vougese39 said:
spam it is not!!
yes the 4.6 has slipped liners and cracked porus block but if you have the top hat linners fitted this will cure the problem and if it is fitted to a classic with a open loop emissions set up it will not happen again
Click to expand...

"just done one for a customer see my web site"

smells like spam to me ............
 
and why is that?
i'am only to try and help people and at the same time build a business is there a law against that on this forum?
 
well i have never been told that on any other forum i use but if the moderator is unhappy i will conform and just leave my sig instead would you be happy with this?
 
vougese39 said:
well i have never been told that on any other forum i use but if the moderator is unhappy i will conform and just leave my sig instead would you be happy with this?
Click to expand...

am not a mod so it's got nowt to do with me - i just make me point and put thems thats got adverti n their sigs on me ignore list

if your here intending to make commercial gain subtly via your posts then in my mind thats wrong
 
Exactly what sean says, usually the great thing about LZ is the goodwill ans satisfaction of memebers just trying to help another landy owner out, unbiased and without prejudice(well apart from td5/tdi wars :D) no one needs to have traders harking on and blatantly touting for business!
 
well not wanting to start a war of words but if you look on some of the other posts i have left info and help with out offering my site! And as i have already upset some one you will be ignoring anything i say or offer as help i feel best to leave this a no win situation and better to help the man with his problem rather than carry on and leave it up to the mods then
 
vougese39 said:
well not wanting to start a war of words......
Click to expand...

You Never ****ing do, do you! But amazing how often you seem to succeed!

Seems a bit bludy obtuse too, coming from a bloke who is Dyslexic and insists that the world should make allowances for his shortcomings rather than the other way around!

However, as for the 'advice' you have contributed so far to this forum; I'll remind you of that I offered you on LRO;

Read the post PROPERLY before you reply; compose your post PROPERLY, use Word and its helpful grammer and spelling checkers, if you need to; THEN read original post AGAIN, before hitting the 'reply' button........

And add, that on THIS forum, people here WILL call a spade a spade and use base anglo-saxon to express themselves, and take the rip at will if you act the tosser.

Oh, and welcome to the zone..........

Sean said:
spam spam spam
Click to expand...
Actually Sean, no; he has difficulty with customers.... aparently they bring him far too many 'problems'...... like
goonarmy said:
4.6 slippy liner, cracked porus block engine.No.
Click to expand...
Which are apparently NOTHING to do with cash strapped Rover pushing the limits of what could reasonably done to an old motor designed to tolerences intended for chaps in flat-caps and hand-lathes rather than lazer guided CNC machining centres, but becouse we, the 'owners' dont know how to look after them properly....... only he does!
DONT anyone get him onto EAS for ****s sake!
Khryztal said:
Oh, and it has gas conversion. open loop system.
Was toying with the idea of a supercharger though.
Click to expand...
Dont we all! :D:D:D:D
 
Teflon said:
You Never ****ing do, do you! But amazing how often you seem to succeed!

Seems a bit bludy obtuse too, coming from a bloke who is Dyslexic and insists that the world should make allowances for his shortcomings rather than the other way around!

However, as for the 'advice' you have contributed so far to this forum; I'll remind you of that I offered you on LRO;

Read the post PROPERLY before you reply; compose your post PROPERLY, use Word and its helpful grammer and spelling checkers, if you need to; THEN read original post AGAIN, before hitting the 'reply' button........

And add, that on THIS forum, people here WILL call a spade a spade and use base anglo-saxon to express themselves, and take the rip at will if you act the tosser.

Oh, and welcome to the zone..........


Actually Sean, no; he has difficulty with customers.... aparently they bring him far too many 'problems'...... like

Which are apparently NOTHING to do with cash strapped Rover pushing the limits of what could reasonably done to an old motor designed to tolerences intended for chaps in flat-caps and hand-lathes rather than lazer guided CNC machining centres, but becouse we, the 'owners' dont know how to look after them properly....... only he does!
DONT anyone get him onto EAS for ****s sake!

Dont we all! :D:D:D:D
Click to expand...

:doh: looks like teflon has spat his dummy out again grow up!
the reason myself and teflon do not see eye to eye is that i say what i mean and unfortunatly teflon feels i have personal assulted him!
i have never verbaly or by the power of the internet assulted him or bad mouthed him as a human being! but if as he has given poor and misguiding information then that is what i'am guilty of! by trying to point this out!
and as most of you will be aware teflon does like the sound of his own voice which can be very long winded and somtimes totaly off at a tangent to the actual problem being addressed!
and as the with the last post on the lro forum was locked with him having his last word and as i said i'am only trying to help and if this what i'm guilty of then so be it
 
You must log in or register to reply here.

Similar threads

hef19898
Stroking a 3.5 with a 4.2 or 4.6 crank?
Replies
4
Views
1K
norseman
norseman
J
Introduction and PAS problems...
Replies
1
Views
176
JakeFrost
J
ryeguy32118
Classic 1995 Range Rover County Classic 3.9 V8 - Idles but stalls out when in Drive or Reverse
Replies
4
Views
1K
classic kev
classic kev
S
D4 P006A00 Manifold Absolute pressure - air flow correlation - HELP!!
Replies
12
Views
1K
Stevie135
S
A
L322 L322 '03; Completely new to Landy's, so a couple of questions
Replies
2
Views
599
rich28uk
rich28uk
Back
Top