What have you done to your Landie today.

[BOOMER]

How much?

Under 300

 

[marky320]

nothing yet trying to motivate myself to pressure wash underneath ready to waxoyl then start the task of refitting engine box and fuel tank

 

[ratty]

I spent another night sleeping like a baby in the roof tent.

 

[craigyb]

had no jobs to do on my 90' so i mate this instead 1/5th banger racer out of old bits of steel laying about in the garage with a 23cc engine

looks like an fg chassis n running gear to me

 

[discomark10]

Under 300

Not bad... not bad at all!

 

[BOOMER]

Not bad... not bad at all!

Bumper with built in spots, new fixing bolts and swivel recovery eyes with shackles.....all for £289

 

[The Mad Hat Man]

removed clutch master cylinder, Brake servo & master cylinder, steering column, pedal box and a few other bits.

 

[BOOMER]

removed clutch master cylinder, Brake servo & master cylinder, steering column, pedal box and a few other bits.

You bin busy daft!

 

[Paul D]

You bin busy daft!

Heh, 5 minutes with an angle grinder isn't busy .. it might be when he has to put 'em back though!!

 

[BOOMER]

Heh, 5 minutes with an angle grinder isn't busy .. it might be when he has to put 'em back though!!

There's always a method to his madness....allegedly...

 

[The Mad Hat Man]

You bin busy daft!

did ya read what Sniffs n I did yesterday?


Angle grinder aint working cos Genny is buggered again!mad:

 

[BOOMER]

did ya read what Sniffs n I did yesterday?


Angle grinder aint working cos Genny is buggered again!mad:

Nope, didn't see was kinda busy myself yesterday anorl

 

[The Mad Hat Man]

Removed Engine & gearbox from the convertable, with the fantastic support of Snifflebag. Thank you, once again.

Yeah I saw. It's looking good, Rob

 

[BOOMER]

Yeah I saw. It's looking good, Rob

Blurry eck, major surgery on the droptop!

As for my motor I couldn't have done it without DVs help, bless him, he stuck it out to the finish despite the rain....

 

[The Mad Hat Man]

anyone wanna buy a disco kit?

 

[Paul D]

Glued the headlining material back up to the foamy bit at the top of the windscreen .. bloody things been flopping about for a few weeks!

Checked underneath to find a breather pipe pulled out with pond weed all over it, and a brake pipe seriously bent around the Tee-piece .. I guess when I drove through the ford the other day (Eckersley green lane) the bump I felt was a tad more than rolling a rock over!

Breather was a pushfit thing and went back in easily and I couldn't pull it out without pressing the lockring thing, so I guess I hadn't fitted it properly in the first place .. hope it didn't come off while in the mud at North Yorkshire the other week!

 

[Vagrent]

Yesterday I fixed the rad and fitted intercooler.
Now the door s ducked again

 

[Dave90]

Simple things, found a better earth for the CB radio, because apparently it can affect the reception badly, found a place to put the CB microphone clip on the dashboard and usual Sunday stuff, checked levels under the bonnet

 

[Mark L]

Used it to help tow a fire engine off a field.

 

[Snifflebag]

did ya read what Sniffs n I did yesterday?


Angle grinder aint working cos Genny is buggered again!mad:

Oops - meant to post a pic...