Sorry no pictures can't copy thoughs for some reason but general gist below.
EMERGENCY KEY ACCESS
If the handset is lost or fails to operate, the
engine can be re-mobilised by using the key to
enter a unique four digit emergency key
access code. The code is recorded on the
Security Information card and is entered as
follows:
1. Using the key, turn the
drivers door lock
(anti-clockwise) to the LOCK
position 4 times and return
the key to the centre position
(as shown) after each turn of the key. It is
now possible to use the key to enter the
separate numerical values of the four digits
that make up the emergency key access code.
IMPORTANT INFORMATION
When entering a code:
ENSURE each key movement is
carried out with care and precision
and turned through the full extent of
its travel.
After turning the key to either the
lock or unlock positions, make sure
it is FULLY returned to the centre
(vertical) position.
If you forget your place in the
sequence of key operations and,
therefore, do not complete a code,
open and then shut the door and
start entering the code again (this
will not count as a failed attempt).
2. Enter the FIRST digit of
the code. If the first digit is 4,
turn the key (clockwise) to the
UNLOCK position 4 times.
Ensure the key is FULLY
returned to the centre position after each turn
of the key.
3. Enter the SECOND digit of
the code. If the second digit is
3, turn the key to the LOCK
position 3 times. Remember;
the key must be FULLY
returned to the centre position after each turn
of the key.
4. Enter the THIRD digit of
the code. If the third digit is
2, turn the key to the UNLOCK
position twice, ensuring that
the key is FULLY returned to
the centre position after each turn of the key.
5. Enter the FOURTH digit of
the code. If the fourth digit is
1, turn the key to the LOCK
position once. Ensure the key
is FULLY returned to the
centre position after the key has been turned.
6. FINALLY, turn the key to
the UNLOCK position once
more to disarm the alarm and
re-mobilise the engine. If the
code has been entered
successfully, the anti-theft alarm indicator
light will extinguish, the doors will unlock and
the engine can be started.