hi all i need some help i have bought a 2003 freelander 1800 k series it starts fine with no probs but when you drive it down the road it seems very flat and guttless till it hits 3500 rpm then it seems fine it brings nothing up on the code reader so am at a loss
ive changed the following
crank sensor
map sensor
cam sensor
steppa motor
throttle body
plugs
leads
coil packs
the head gasket has been done before i bought it and ive done it since aswell and still its flat right now for some questions
1 if the cams had been fitted wrong ie inlet fitted on exhaust and vise versa would it run as i fitted them the same as they came out ??
2 is it possible to get them 180 degrees out if so would it run
if anyone has any ideas let me know even if you have had the same prob
its almost like days of old with timing advance and retard
ive changed the following
crank sensor
map sensor
cam sensor
steppa motor
throttle body
plugs
leads
coil packs
the head gasket has been done before i bought it and ive done it since aswell and still its flat right now for some questions
1 if the cams had been fitted wrong ie inlet fitted on exhaust and vise versa would it run as i fitted them the same as they came out ??
2 is it possible to get them 180 degrees out if so would it run
if anyone has any ideas let me know even if you have had the same prob
its almost like days of old with timing advance and retard
Last edited: