Search results

Hey all, when changing the front mudflats on my Disco, (the brackets are rotten,) do I need to lift the front carpets?

Can anyone tell me if there is a kit available for the fancy little clips that hold on the front mud flaps to the plastic body trim. It seems I can buy them WITH the mudflats but I can't find a supplier of the clips?? Thanks

So. Having avoided the catastrophe of dropping coolant all over the road (it dropped it on my drive - how lucky was I) I changed the top hose. refilled etc and run up and its watertight. STEAM everywhere part 2 thread was because she would not move above "cool" on the temp gauge and I was...

Hi all after your words of wisdom last time guys I managed to get sufficient coolant back in to the system after my top hose went. Thanks to all that helped with advice and pictures etc. Only issue I have now is that the temperature gauge only just moves above the blue. Been for an 80 mile...

Plenty of pointers in here guys Thanks

Ill give it a go Thanks James

So after escaping overheating because the top hose let go ON THE DRIVE I decided to take the opportunity to flush system out. New hose fitted and system flushed out, According to Mr Haines, I should need 8 Ltrs to fill it back up. I got 5 litres in and ran it up. Cant get any more in Should...

Sworn at it and beaten it with a stick. Then thought How lucky I was: top hose dumped coolant all over the drive (and engine bay) Just as I pulled up after the school run.....

New drop links and a bump stop on the S2 Disco. Stupid question... Why are there no flats on the ball joint side of the drop link. Makes getting the rusty ones off a right bugger. Had to get the hack saw out and cut them both off.... New ones have flat spots (17mm) all greased up and done...

MOT'd it, £65 with the headlight alignment and tracking. Small price to pay for a years motoring... Advisories: Rear drop link bushes. Front right hand brake pipe and 2 tyres, Easy really

thanks for looking guys. I found it. It goes behind the NS rear quarter plastics and is for mounting the left hand side third row seat on to

52 views, thanks for looking guys. I found it. It goes behind the NS rear quarter plastics and is for mounting the left hand side third row seat on to

Bought a "kit" from flea bay to add the dickie seats to my disco. all going well but don't know where this bit goes.... Any help at all would be appreciated....

This operator is useless at loading pics.....

Hi All I am in need of your expertise again... I am installing the third row seats to my 2001 Disco 2 I purchased a "Complete Kit" from Flea bay and all appears to be going well.. Only thing is, I have been supplied with a chunk of steel that I do not know where to fit. Bonkers I know -...

New rear coil springs today.. why is it that the first one took 2 3/4 hours and the second just 45 minutes....... probably because its easier to put your jack between that long arm thing and the body and separate them as far as they will go, (brake hose permitting). don't need to compress the...

Thanks Iann Much appreciate the support.

Just looked under mine. GOT scared and ran away very quickly knowing that my MOT is due.

I was born on a morning not yesterday morning. My confusion is that there appears to be 2 options and I don't know, (till I take it off) whether or not there is a left handed thread on the track rod end. I don't want to take the old one off till I have the new one in my hand to save down time...

Hmmmmm me thinks the motor factor option might be the safer bet. Looking for the track rod end there is talk of left handed threads or right handed. why does the Haynes manual not help, Off side track rod end, left or right handed thread??? Thanks guys