Search results

Hi all does the eas need a tank/cylinder to work, I am going to operate it manually. Ie seperate 12v to pump and valves ?

Hi again all, has any one used this TOOL for there td5? Just wanted to know the correct porceedure when doing it, ie is it ok to crank the engine with the rocker cover off, as i have the rocker shaft out aswell or will i be covered in oil? would turning over by hand produce enough pressure ?

Hi all i suppose there are loads of winch bumper question, i am after one of these First Four Shadow Tubular Winch Bumper with A-Bar for Land Rover Defender with Air-Con I have a defender bodied disco 2, so my chassis only sticks out 100mm, from my grill and the inter cooler is touching the...

Hi all, i have just finished a landybuild, (td5) took her out for a spin and there is a new ticking sound appeared in the engine, it sounded top end, there is no relation to anything other than the engine, it wasnt any pullys, so i popped the rocker cover of and found that the 5th cylinder cam...

HI all, quick question to the series owners :) I am using anti burst locks locks for my 100" defender build and wasnt sure why the door strikers where £10 different in price. Is it because one is also used for the back door on a fender, Also are all these the correct part numbers and is...

Hi all, i know this question has been asked many times but, Has any one used this oil for the Ace ? And how much will i need for the entire system, as it is completely empty, Thanks Ben Halfords | Castrol ATF Dex II Multivehicle 1L

Hi all, can anyone clarify the purpose of this sensor ? It it just for the Climate controlled discovery for external temp ?

Hi all, I am trying to chose a winch bumper for my defender hybrid. It is on a d2 chassis so has the bolt holes in the front of the chassis the other way ie sideways not downwards like a fender, It will have to be a fenda one as they sit higher than d2 ones I think. I am looking at the...

Hi all, does anyone know where I can buy the terminals that bolt down into the fuse box ( funny shape ). All I really need is the, A and B type as it has that stamped on it, one is on the link cable to the alternator and the other goes to the batt I think :) Found a picture ( it's the...

So I was driving home last night at the speedo all of a sudden dropped from 50-10-0 (bummer) So when I got home I took the dash out to see if the cable was spinning(300tdi old school :) But it was not spinning, so I have just ordered a new speedo cable. My question was is this common to...

Hi all I have a 300tdi fuel filter housing, but the inlet and outlet banjo's are different sizes. One is 6mm and the other 8mm. Does any know where I can get a 8mm banjo to fit, I have tried my local fixings place where I buy all my connects and pipe but fell short as they don't have them ...

Does anyone know if the p38 air bags will fit onto a discovery 2, Or the size difference between the air bags ? Ie height and width ?

What a landy, might have to buy a 110 for a project ha ha Queen's 4x4 Land Rover Defender getting £80,000 makeover | Mail Online

Can someone tell me part number for the rear output locknut ( 30mm ) As shown in the picture No 29 All I can find is the kit, don't need that as the seal is ok, I have managed to order a felt washer :)

Hi all I am in the process of stripping down my wiring loom and wondered if someone knows what this bit is for? I have searched and I think it is where you can plug in a relay to prevent a caravan from draning you car battery when the engine is of. If so does any one know where I can buy it...

Hi all I am after 2 or 1 goodyear wrangler mt/r tyre preferably on a d1/rrc rim with the size of 245 75 16. Hopefully in in midilands area. Thanks ben

Hi all I am after a custom alloy fuel tank, I have sent drawings of to a few company's but they all seem very expensive! I would build my own if I could weld alloy but hey ho, so does anyone know of any good company's or people on the forum who are a dab hand at alloy welding or fuel tank...

Hi all, i am after a front twin shock mount for a discovery 2. I have browsed the web but only to find them for discovery 1, 90, 110 but not sure if they will fit a d2? Anyone know a little more? Thanks Ben

Hi all i am on the look out for a discovery 1, 1/4 rear chassis or a cheap complete chassis, Doesnt have to be perfect just not to far gone and not required patching.

Hi all I have for sale a wide range of discovery 2 td5/v8 parts. Mainly will be interior and seats and bits and bobs. Feel free to message me if you know of something you need:)