Fuse box terminals

Hi all, does anyone know where I can buy the terminals that bolt down into the fuse box ( funny shape ).
All I really need is the, A and B type as it has that stamped on it, one is on the link cable to the alternator and the other goes to the batt I think

Found a picture ( it's the terminal on the brown lead at the bottom of the picture)
Thanks Ben

It's just a flanged hex bolt isn't it?

FS106201L is the flanged bolt, the cable terminals are 'flag terminals', but not a common thing to find commercially.

Peter

listerdiesel said:

FS106201L is the flanged bolt, the cable terminals are 'flag terminals', but not a common thing to find commercially.

Peter

Click to expand...

Ah yeah, good point, misread the post :5bblush5:

I didn't think I would be able to buy them
Can I buy a standard flag type terminal for 16mmsq cable (8mm)?

As I said, they are a bit specialist. Can't you get the cable from a breakers?

Commercially, someone like Rists might sell you some, but they are not in regular use.

JST and a few others are showing something similar:

http://www.jst.co.uk/downloads/series/eFLUG(11-09-07).pdf

Peter

I have the original cable but I need to extend it, I might just put a but connecter in there and crimp that up to extend it.
Something like this 2 CABLE SIZE 16mm² COPPER TUBE UNINSULATED THROUGH CONNECTOR - RINGS AVAILABLE | eBay

Unless you have an hexagonal crimp tool, I'd solder the joint.

Peter

listerdiesel said:

Unless you have an hexagonal crimp tool, I'd solder the joint.

Peter

Click to expand...

Yes, I can lay my hands on the correct crim tool for the job
I will put a few pictures up when I get around to extending it, now my optimas have arrived