Search results

I eventually had to give in on mine due to lack of time,as I couldn't get the second circlip to seat, and very very painfully had to take the loose props into an inde (rang my local dealer, as they are just round the corner who said 'We've got no-one here who has ever done these before - never...

stufer has got a really good 'how to' for this somewhere on the site

Hiya, Similar fun with mine (see other thread). The FL doesn't have a bracket on mine, only FR for heatshield. However, mine does need the flylead (which seems to act as a crossover). I've now received the flylead from Emmotts (not tested yet) which is the flylead with the green lead...

Hi, cheers. I made sure the slots were clear as possible, including of grease. There are a number of other threads where the dropped roller is mentioned, but given the diameter of the rollers, I wouldn't be able (I don't think) to get it as close as it is if there were a roller in the...

Hi all. I know this should be a stupid question, but the UJs (or UJ, as I'm only on my first one!) are/is doing my head in :D I'm using both Busterbus's and Mad Hat Man's 'How tos'. The problem is, I just can't seem to get the caps squeezed together enough to get the second circlip in...

Make sure you've got some silicon seal around the cabin filter covers. Also, the little screw just towards the windscreen from them (holding the plastic at the bottom of the windscreen down), put some silicon over the head of that. I had the same and someone else posted the screw fix - it...

Is that the new 'flash for cash' insurance scam? BBC News - Warning over 'flash-for-cash' car accident insurance scam

good idea. I need to call them to try to get a lead to connect my headlining loom to the rearview mirror anyway, keep not getting round to it so that's my excuse. Saves me having to solder up under the chassis as well, which will make that a bit easier. In fact, I should just be able to...

even with a cut about loom? I guess it makes it easier to buy spares in the future :) I'm more than happy to take that advice coming from you keith (sorry Kev, nothing meant by that as I know it was your idea - we all know Wammers and Datatek are the resident experts on EAS!!), so I'll make...

that's a relief!!!

Hiya, I'll put a vernier across the fixing centers later and double check them. Interestingly, on the FR there were three holes in the chassis (FL only has two). Only two being used for the sensor, but no bracket or heatshield. Kev, do you mean do the cross over using the bullets in the...

Yeah, that was a quicker way of saying what I did :D :o The Faultmate will let me do that too, just didn't want to kill the battery :D Cheers for the info on chassis (and Saint), I'l have a look tomorrow.

Hi All, OK, update, just to say she's currently de-pressurised and sitting on blocks at standard height. I put Kevin's (non flylead) on the FL (the one I'm trying to fix) and it gave the same reading as my new non-flylead sensor. I then put the new non-flylead sensor on the FR (leaving...

Thanks Guys. Kevin's new type sensor turned up today, so about to go have a play with it. Will report back.

If you're down my way, feel free to drop in and have a look at mine if you want. My parents have a couple of Ifor Williams (stock and horse trailers) and I wouldn't have said this one is any worse. Give me a shout if you want to have a butchers.... :)

Happy days, that's what i'm going with :D

well, both props off. Not too bad really. The handbrake end nuts were as loose as the transfer box side :( Sadly my circlip pliers are fecked, so will have to get some more tomorrow. Decided that the transfer box end bolts can stay in and I'll put new nyloc nuts on them, same as the...

GritValve, try these: Motorcycle Trailers, General Trailers, Box Trailers & Towing Dollies by Phoenix Trailers I got an 8 X 4 braked off them, pretty good quality and complete with mesh sides and cover :) Paid £1700 I think, or thereabouts, delivered to the door

Hi All, Should be a quick one this, which way round do the front propshaft bolts go (2000 4.6)? Rave clearly says that the heads should point towards the transfer box and away from the diff, however, the pic accompanying those words shows heads pointing away from the diff AND away from the...

For interest, not sure if it will mean anything, or if anyone's got a new version with the internal connector still attached, but I just had another look at my old one (with the flylead) and if you imagine that the flylead wasn't there, and had a connector in its place, then the center pin at...