Search results

Hi, I`ve tried looking, but can`t seem to find these panel retaining clips fasteners, or whatever is the correct term. They are to secure the rear panel on the second row seats. Anyone know the correct part number or suggest elsewhere to look. Thought I had found them with this part no. BTR8976

So after having not moved my Discovery on the drive for a month (away camping for fortnight & replacing the lower steering column uj & adjusting steering box etc ) I went to take it for the mot. I had gone to start it the other day & run it all fine, but never took it for a drive & discovered...

After some advice please. My disco 2 is due MOT & I wanted to get rid of play in steering wheel ( felt like it had no input on steering from 11-1 position ) i found I had play in the lower steering column UJ & set about removing that to replace the UJ with a new item. Anyway after removal, it...

Hi does anyone know part numbers or suggest suitable replacement body mount bolts. All I keep finding are ones for Discovery 1 wich are 3/8th by 3.5". Are these the same as paddocks etc list them for range rover & discovery 1 ? I broke 3 of 4 when removing the hex shaped adaptors for the side...

Hi, I have just retrofitted my difflock & have number 15 high temp gearbox light on the dash binnacle. I found another thread where it stated that I would have to cut the wire on connector co506 pin 9. I thought I may get away with this, as it stated it was not needed on later models (mine is...

Hi does anyone know if it is possible to buy the fuel pipe clips seperately ? My green pipe clip that sits on the fuel pipe & locates into the fuel pump came loose yesterday & one of the tabs on the side has broken off. Hopefully don`t want to buy the whole pipe for the sake of a retaining clip...

Hi, Could anyone give me the correct part number I need, to buy the trim retaining nut (think their called lockuts) that you put the fuel pump cover screws into please ?. I have done a search, but didn't see it & after previously buying ones too big off the bay, I would like to ensure I buy the...

Bought a tig welder as spares/repair (comes with torch & pedal) that I need to get from St Helens Merseyside, down to Cambridge. Thought I would try on here first before booking it on parcel2go. Size is 450 mm L x 450 mm H x 250mm W. It`s currently strapped to a euro pallet ready for collection...

Hi my sidelights stopped working on the way to mot on nearside. It`s a discovery 2 td5. Ive replaced the fuses F10 OR 11 & checked the bulb holders for power (got 21v on front sidelight & just under 12 for the rear if that sounds right) & the bulbd work ok when putting power to them off a spare...

Hi I`m hoping someone can point me in the right direction. After getting my manual box back in and the fuel tank after dropping said fuel tank etc for chassis rust prevention I now cannot get the landy to start. I did the purge procedure & also got it cranking over & sometimes it would click...

Anyone interested in my DMF out of my discovery 2. I bought it along with my clutch in case mine needed replacing. I could of re-used mine, as the new one has more rotational play in the springs than my new one My old one has 3 mm play (I believe I read that max play was 7mm) when moved back &...

Can you take the cdl from another transfer box and transplant it into my own box that doesn`t have the internals ? Reason I ask is there is a transfer box out of a defender at work, but I'm not sure wether its the same as my R380 box. it has 1.222 ratio on the side and I can`t see any serial no...

I know this will probably open up a can of worms, but should I replace the dmf along with the clutch ? A bit of background info. I had replaced the broken bias plate & springs etc late year & got nice smooth changes but my second gear synchro has needed replacing for a little while wich I put...

Hi I am having probs with my off road suspension not working. I have the sls light and off road light lit up on the dash. The off road mode does`nt ping when switch is pressed & I have tried another switch to no avail, checked the fuses & relay and their all good and also checked for continuity...

Can someone help me with timing marks please. I`m doing my injector seals & following the d2 forum guide in wich they show 2 coloured links & say there are slots at the back of sprocket. I have the slot at the front of the sprocket & the 2 bronzey coloured links in 2 different places. Could it...

Hi I`m after a bit of help & advice with some hawkeye codes on my td5 and their meanings & could`nt see anything after a quick search. After getting the three amigos come up after going down a bumpy road, I discovered my n/s/r hub sensor wire was a bit loose. I decided to buy a hawkeye to make...

Hi Guys, I did a full fluid & filters change + new injector Harness. I dropped the sump to change the Oil pump bolt for one with thread lock on it & gave it a full degrease & new sump gasket. Whilst doing the top cover up I left my mate to refit the sump plug & undertay, whilst I started...

Hi guys, hoping someone can give me an idea where to start looking for the cause of my leak. When I bought my discovery td5 I knew about the leaking sunroofs, so as the one I went to buy had 2 & it was a wet day I felt all round the headlining to make sure there was no dampness & all good or so...