Search results

more than welcome if you need it. I have nanocom as well, only for gems petrol though

I have 2 tanks a 45ltr and 90ltr underslung with no loss of boot space and retaining the original petrol tank on my p38. RPi Engineering - Specialized Rover Engines - faqs :D

hawkeye is definitely not locked to one vin on p38. mine does all p38 engine variants. used it on my 4.6 v8 and sons 2.5 dse :behindsofa:

hi guys is there anywhere I can get info on when a land rover service exchange engine was built. for instance will the serial number tell me ? serial number is AAA S12054 C7 Model STC1967F

never too old to learn stuffer :D

ok guys here is a sitrep. I removed the head that was fitted and cleared all the bolt holes out with a tap and blew them out with an airline. lubricated the bolts with clean engine oil including under the head of the bolt. 20nm then 90 degrees then 90 degrees was finaly achieved much easier...

5/8 hex snapon socket busted the rest were various makes only a brand new cp impact socket shifted them. one had to be drilled out by drilling the head off to almost the same size as the bolt shaft and tightening until it snapped :eek: then it unscrewed with fingers. new bolts used that are...

hi guys and gals I have been busy doing the head gaskets on my 1996 4.6 hse now the lr manual says torque settings are 20nm then 90 degrees then a further 90 degrees, {in the correct sequence of course } im using new bolts elring gaskets and the heads have been pressure tested and skimmed...

well I think it looks great dopey. I take it the letters don't stick out so much as the originals

thanks guys decided to leave them connected and swing the inlet manifold out of the way on top of the battery cover.:D

sorry stopover. its a gems engine and its the plugs on the injectors. I think they have gone hard and brittle so squeezing them seems to be likely to break them. and trying to prise out the spring clips :violent:

hi guys and gals feeling a bit daft, but is there an easy way to remove the injector harness plugs . it seems a stupid way to have to prise out the spring clips. or is that it. some of the plugs just push the clip forwards and pull, but the injector ones :confused:

just wondering what happens when more than one bidder uses auction sniper. who is going to win :D

canbus compliant LED sidelight bulbs are available, I got mine from halfrauds

problem update . found the wire from the nsr sensor had been damaged and one of the twin cores had become broken. a bit of solder and shrink wrap later, cleared the fault with my nanocom and away we go. phew mot next saturday. so spot on wammers thanks.

WD-40 Frequently Asked Questions :5breddevil:

+1 on wot hippo said

thanks wammers that's what I thought.

the abs has gone into fault mode with abs fault and traction failure on dash. just in time for the mot on jan 12th :mad:. nanocom says left hand rear sensor open circuit. does that mean a broken wire or sensor is duff. any help appreciated guys.

new tailgate and upgraded to 2000 spec lights, re gassed the aircon, now to wash the rest of the car, looks odd with nice shiny tailgate and dusty rest of the car