Search results

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
  1. freelander1xdi

    rear sub frame passenger side rotted all the way through mot fail

    Freelander 1999 station wagon 2.0 d Dropped the sub frame down its on the rear passenger side its rotted all the way round the rear tube just before where the bolt goes in, once it was dropped the above metal is fine. Its very odd i was expecting to find allsorts of nightmares thinking maybe it...
  2. freelander1xdi

    Water Temp Guage not moving or only going upto 1 third

    freelander 1 - 2.0 l series diesel Noticed yesterday when i had gone on a reasonable run that my water temp guage was only on 1/3 oposed to the usual half way that it always gets to and never moves from. Today went on a shorter run and noticed that the temp guage didnt even move up Does this...
  3. freelander1xdi

    Freelander 1 xdi 2.0 Anti Roll bar Knocking Suspension Strut when Cornering

    Hello had a knocking when turning right and when it was in for the MOT and up on the ramp i could see the roll bar was off center and you could see where it had been fouling the support strutt. Garage said it was the roll bar had rusted away which once it was off was clear it had worn the bar...
  4. freelander1xdi

    bottom Tie Rod mount

    Hello guys went off to work today and noticed a clunking when changing gear, got under it and realised by bottom tie rod bracket was loose. Tightened it up and its ok bit of vibration through the cab on tick over. Do you think the tie rod bushes could be worn and the vibration has loosened the...
  5. freelander1xdi

    Freelander 1 xdi 2.0 Top left hydro engine mount how to

    This one was really easy first take the top tie bar off the mount one bolt 15mm Then push it up out of the way Then put a peice of wood under the engine and jack it to take the weight then get an 18mm socket and loosen the bolt on top of the mount take the nut off jack the engine over the...
  6. freelander1xdi

    Lights Coming on when break pedal applied [fixed], advice on gearbox side engine mount?

    Recently changed my rear cluster as it was smashed Noticed last week when I pressed the break it was putting on the front lights This was a faulty wire that came with the new rear light cluster, put my old one on and its fixed. Weird thing that. Anyway I have just serviced my Lseries 2.0 D and...
  7. freelander1xdi

    Sills Welding

    98' L series station wagon 5 door. I have a couple of holes in the rear of the outer sills they are tiny about the size of a 50p but they are corroded and getting worse, I have cut out and theres now two holed about 40 cms long and 5cm high about the same both sides. They are being welded up...
  8. freelander1xdi

    Starting problem l series

    **FIXED** I have had an intermittent starting problem for about 6 months, starter motor and solenoid are new, was told it was imobiliser, keyfob, wiring loom, starter relay amongst other things. starting involved turning the key up and down 20 times it was worse when really hot. Anyway it went...
  9. freelander1xdi

    Surging Revs / Hunting

    freelander 1 lseries last year i was having issues with surging revs, it seems to do it particularly when its hot, it goes after a few blips sometimes but other times it doesnt just sits around 1100, then can drop down to just over 500 which is where it seems to idle usually when its at 1100...
  10. freelander1xdi

    freelander 2.0 xdi increasing revs when engine warm

    I have weird problem with my freelander one 2.0 diesel. 1998 When its cold and started up it runs really smooth and ticks over just below 900 rpm. Once it is warm it feels like the engine becomes quite rough, the temperature gauge is fine in the middle and it revs ok and drives fine but feels...
Back
Top