Freelander 1 xdi 2.0 Top left hydro engine mount how to

This one was really easy

first take the top tie bar off the mount one bolt 15mm

Then push it up out of the way

Then put a peice of wood under the engine and jack it to take the weight

then get an 18mm socket and loosen the bolt on top of the mount

take the nut off

jack the engine over the bolt

loosen the two bolts holding the mount to the body 13 socket

take the old one out

put the new one in you might need to wiggle the engine a bt

Put the bolts back in for the mount but dont tighten

drop the engine and with a bit of wiggling it will go home onto the bolt

put the nut back on and drop it all the way then tighten everything back up

the end