Search results

I've used pub gas for ages, but I've moved, and cant get a supply any more. I have 2 bottles, empty, does anyone know anywhere round Leeds/Bradford/Wakefeild/Cas where I could get them filled, cos ill be damned if im paying £13 a pop for the little disposables.

Ideally I'd love to whack a new chassis on, but funds wont allow. Every other year I need to do some chassis welding, a few years ago redid the whole back chassis from the rear wheels backwards. 2 years later needed repair further forward, round the trailing arm mounts. Now I've got bit needing...

Now, I was under the impression there was a thermostat for the oil cooler in the fuel filter housing. Upon this presumption, I decided to try starting the fender with the rad removed (and thus oil lines disconnected) after refitting the cam belt. She started, lumpily, so I got out to have a...

What it says... Anyone know the part number for a 300tdi injector pump stud? google fu has failed... :(

I need to replace the pump to box pipe on my 300 tdi. anyone know if i need to remove the rad to do it (ie do i need to go get more antifreeze :) ) cheers :)

I'm looking for a waterproof action cam, mainly for when I go snorkelling next year, but might as well get one that I can use with the landy. Seen them from £25 to £250 Obviously being a tight yorkshireman id like to spend as little as possible, but I do want it to give at least half decent...

Ok, so everyone knows about window etching, but what about other parts? I've taken to punching the reg No into parts I'm fitting, anything that will be able to identify parts or my motor is good IMO. Earlier in the year the police near me were marking doors, bonnets etc with an etching marker...

My eggsauce is, how do we put it politely, knackered... Looking at swapping to a stainless system, but need one with a side exit, as ive already got a hole cut/side exit and i likes it :) I at least need a downpipe and straight thru middle, the last section will live a bit longer, but not...

OK. it seems my knackered knee has reared its head and decided to stay. So, I'm looking at options for my fender to ease the clutch a bit. so far I've found 2 main options. Auto box conversion (£2K +) or redbooster (about £400) Ive also been looking at remote servos, and at £80ish for a 1.9:1...

Worryingly close to me. :( Otley , LS21

any other suggestions? Defender 300tdi, clutch has done just over 20K. Its slipping, but not all the time, I drive up a steep hill home, and same gear/same speed at full throttle some days it will slip, other days it wont. its almost as though somethings not quite engaging fully, as its...

Reet. Got a 110 CSW, that is in need of repair under the rear ARB mounts (how the feck the mot didn't notice, I have no idea, one had collapsed into the chassis!!!!) Shes got a 2" lift. Do I repair, and replace the ARB mounts where it is? Do I repair, and space out the ARB 2" from the...

Now this might sound like a really stupid question, but... Can I stand on the roof of my fender, without damaging it? In the long term, I aim on getting a proper roof rack, but at present I have roof bars, and need to get up to it to attach bikes to it. climbing on the roof, and doing it from...

my googlefu has failed me. Im looking for the part number for the inner panel for the second row doors on a 110, not the door card, but the one underneath, for the offside. its kind disintegrated, im repairing the door, but the card is too far gone to faf with i think Cheers.

Yes,another one. Just wondered if anyone had a bits list. What I'm doing is, leaving existing lil silencer, then coming off the back of that to side exit. 2 reasons. 1. The tail pipe has rusted out, but the rest is solid. 2. I'm fed up of mucky marks on the front of me caravan :) Looked at...

I need to replace my main lead from battery to starter, was going to get some welding cable to replace it with. Mines past its best, the terminations are a little corroded, and its starting to give me a sluggish starter, and a less than optimal charging., in fact I needed to switch in the second...

which ones? , there seems to be 2 different types, both listed as for the 300tdi, one is flat, the other has a raised bulge. second, if its the bulge, which way up do they go??

Reet. I did have a 7" tablet for navigation that died recently. So, im looking for a new, cheap tablet to use in the landy. Im looking at about £100 for it, so I know its a cheap jobby, but the last one lasted 3 years for £50, and if I drop a sub £100 tablet in a puddle im less likly to cry...

Ok, so having decided my right leg is aching a bit more than it should, I checked to see if my brake servo is working. It isnt... TBH I think its the vac pump, I had the "clicking" a week or so ago, and the brakes are now a tad heavy, but it would be stupid not to check the cheap option first...

Reet. quick Q, or possibly... After researching, it was suggested that installing a second alternator, and have it spinning would be fine as longs as nothing was connected (ie it wasnt "exited") as unless it had exitement it wouldnt produce voltage, I am aware that normally running an alt...