Search results

Hi All Both P38's in trouble now. DSE has hard fault on EAS and is going in for a new air spring next week and HSE has front diff problems. What I would like to know is can I turn the HSE into 2 wheel drive to stop me having to hire a car until DSE is back from garage. Regards Craig

Hi My 4.6HSE has finally died. I have had a problem with the front wheels scrubbing and losing traction for a while now and could not find the problem. Last week I think that I identified the problem as the viscous coupling in the transfer box / front prop shaft but to late as on Thursday...

Hi All I have searched the RAVE cd but cannot find any where a mention of the radius arm removal on its own. I have found a mention as part of the axle removal but I'm now stuck. I have cut through the bolts holding the front arm bushes and both arms are now loose. I have then tried to...

Good morning all Can some one tell me why the front radous arm bush bolts are fitted from the inside out so as to make it impossible to remove them without cutting them or removing the anti roll bars? and once cut can I then fit them from the outside in? Thanks Craig

Hi All I have an intermittant problem with P38 4.6 HSE. It sometimes when warm feels like it is hesitating and has a type of back fire which from my days with cars with single coils would suggest a coil breaking down. I think that a coil is breaking down on my car and would like to...

Hi Had to fit a new battery today so got the radio code ready and the EKA code as well. Changed battery forgot to do EKA code put the key in and she fired up without having to do the code. I have checked out the rest of the alarm and it appears not to be working at all. I have had alarm...

Hi All I have purchased a Van Aaken power box for my P38 BMW diesel engine. As it is second hand I do not have any fitting instructions. It has 2 big round plugs and 2 small square plugs. Does anyone else have one of these fitted and if so could you tell me where the plugs go to or...

Hi Can anyone tell me if the front and rear diffs on a DSE are the same i.e. could I fit a front diff to the rear of my P38. Thanks Craig

Hi Does anyone have a rear axle or diff that they would like to sell from either a 4.6 P38 or a 2.5DSE p38 as I need one :rolleyes: Thanks Craig

Reading a recent thread regarding updating the front end of a P38 found this on Ebay LAND ROVER RANGE ROVER VOUGE AUTO SPARES BOTH BREAKING on eBay, also, Range Rover, Car Parts, Cars, Parts Vehicles (end time 01-May-08 12:02:09 BST) Just in case anyone is interested Craig

Hi All Finally got round to doing the dreaded "O" Rings today and done it all in about 6 hours. Not had a chance to test yet but all went well using ti RR.NET site advise. One down and One to go as my 2.5 DSE has started to do the same thing :mad: Craig

RANGE ROVER OVERFINCH 570 /P38 RANGEROVER on eBay, also, Land Rover Range Rover, Cars, Cars, Parts Vehicles (end time 22-Mar-08 19:24:24 GMT) Any one fancy this one:)

Well changed the pinion bearing on the rear diff and it is more than the bearing as I'm now getting a clonk as the wheels/diff go round so must be either diff or drive shafts with tooth/teeth missing well f*/*+d off now :mad:. Anyone know of someone breaking a P38? On another note...

Hi I have purchased a new brake accumulator for my P38 4.6 HSE and have read the rave cd and it says to bleed the brake system after you have changed the accumulator. Is this right? Has anybody changed the accumulator and can give me an answer? Thanks Craig

Hi All My P38 Diesel was relayed home the other day with rear diff problem. I have got underneath and found a lot of movement from the propshaft where it goes into the diff. Looked on rave cd and thought it must be rear diff pinion flange kit so I bought one. I now have the unit on...

Hi All Does any body know if there is a wiring diagram available for the p38. I would love a Haynes manual but they are not making one for the p38 yet but it is on the list to be looked at. I cant find any wiring diagram on the rave cd any ideas? Thanks Craig

Hi All Trying to remove the front passenger side hub and shaft. Done all the rave cd tells me to but even with copper mallet will not come apart. Is there something that I am missing? only thing that I have not removed is the abs sensor bush Thanks Craig :(

Hi All Have had my p38 DSE for a couple of weeks now. I have been driving it carefully to see what I could get to gallon. 55-60 on cruise control on 40 mile journey on dual carriage way and getting 21 mpg. This seems to be less than others here on the forum. Yesterday thought Id see...

Hi All Back in February I bought a 4.6 HSE. The previuos owner was using the keyfob as a normal key as he said that it played up. When I got her home I opened the keyfob and put in new batteries 2032 type. The key fob still played up loosing sync often so have just been using the...

Hi All Picked up my latest project yesterday. 2.5DSE with possible head problems. Trailered home as total flat battery and put on charge. This morning reconnected the battery and the doors locked themselves. Tried key fob resink no luck opened drivers door and alarm went off. Tried...