Search results

Hi everyone, Been a while since I posted here. I've just bought a 2001 Vogue in pretty much perfect nick, service up to date, Air bags and compressor replaced about 20k ago. When taking off this morning all was fine, went down to motorway height no problem. Coming off the motorway I noticed it...

EAS Compressor EAS Valve Block EAS Dryer £100

As per title. Good condition. £35

Today was a nice and sunny day so thought it would be a good idea to tackle the oil leak. Oil is running don the oil filter when engine is running. I have read a few threads about the oil pressure relief valve, but to be sure I changed the oil and filter first to eliminate a leaking filter...

Hi all, My RR has had a spring conversion, but the box with compressor is still there and still connected. Can I just disconnect and remove this without any further issues?

I am planning of upgrading the headlight bulbs. Not to more wattage bulbs, but simply to brighter, less yellow lights. I believe the dip/main are H4, the high beam H1?..but what are the park lights? 501?

Hello everyone, After 2 years of absence I have returned to the RR ownership with a 1998 4.6 HSE :) The immaculate 18 inch wheels are fitted with 285 55 18 Pirelli Scorpions. These are really needing replaced and came across a nice set of 255 70 18. Will these fit? I...

Hi guys, I thought I had the problem fixed :( NOT I booked the RR in for an MOT tomorrow morning and thought, I'd give it a trash down the road> About a 5 mile trip and when back in the drive water was spraying from the expansion cap! bottom hose from Thermostat was cold Now I...

Hi everyone:) Doe anyone know if it is tricky to remove the rear bumper trim with the bumper in place? a pic

Does anyone have the rear light interior cover (not hatch) in dark grey or black? Only a small item, but it annoys me it's missing :)

Anyone has or knows where to view a list of P38 paint codes?

On startup I have ABS - TC and brake warning light on. After about 30 secs the TC and brake go out but ABS stays lit. Sensor?

Anyone running with 10w50 or 15w50 in their V8?

is there a rev limiter fitted which operates at around 5500rpm?

1. 2001 4.0 V8 engine 70k miles 2. New Timing cover p/n ERR6438 3. New Intake manifold Gasket p/n ERR7306 PM for more info

Fitted the new core plug, new thermostat( what a b*gger that is to replace)... took my time filling it back up again. First time idling it started overheating again :frusty: Gently pulled back the small hose (from top to t-stat) let all the air and steam escape. Filled up the exp tank again...

I saw that the new gaskets are made of a different material than the ones that were on. I now have gasket material with 1 'metal' side instead of the multi layer metal one. Which one is best? I understand the metal part of the gasket goes against the manifold side, right?

Today, phoning around the local motor factors and boat engine builders for core plugs, I found a 2001 4.0 engine in good nick and running order for £200. I'd say that's a good price? Always handy to have a spare one kicking about me thinks :)

The LR dealer did not order the right ones(too small), so no playing with the RR today :( Has anyone got a part number for the plug or knows the exact size. My rough measurements told me the hole was about 39mm .....give or take a bit :) The guy from LR phoned me back today and said...

My windows work fine, but everytime when pressing up I get the message that the window is not set. It does this for all 4. Any ideas?